Lan Configuration - Kontron KTH81/mITX User Manual

KTD-N0882-I

LAN Configuration

Advanced
LAN Configuration
ETH1 Configuration (Left)
Wake on LAN
MAC Address & Link status :
ETH2 Configuration (Right)
MAC Address & Link status :
F1 Help ↑↓
Esc Exit ←→
Note: The "+" and "-" (to the right of the MAC address) indicates respectively if link is established or not.
Function
ETH1 Configuration (Left)
Wake on LAN
ETH2 Configuration (Right)
Page 84
Phoenix SecureCore Technology Setup
LAN Configuration
[Enabled]
[Enabled]
[00E0F42C4E01-]
[With PXE boot]
[00E0F42C4E02 -]
Select Item +/-
Select Menu Enter
Selection
Disabled
Enabled
With PXE boot
Disabled
Enabled
Disabled
Enabled
With PXE boot
KTQ87/KTH81 Users Guide
Item Specific Help
Control the Ethernet Devices and
PXE boot.
Change Values F9
Select Sub-Menu F10
►
Description
Control the Ethernet Devices and PXE boot.
Enable or disable integrated LAN to wake the
system. (The Wake On LAN cannot be disabled if
ME is on at Sx state).
Control the Ethernet Devices and PXE boot.
BIOS - Advanced
Setup Defaults
Save and Exit