Kontron KTH81/mITX User Manual page 14

KTD-N0882-I
LAN Support •
1x 10/100/1000Mbits/s LAN (ETHER1):
Intel® Clarksville WGI218-LM Gigabit PHY w. AMT 9.0 (Q87 only)
Intel® Clarksville WGI218-V Gigabit PHY (H81 only)
•
1x 10/100/1000Mbits/s LAN (ETHER2) Intel® Pearsonville I211AT
•
PXE Netboot supported.
•
Wake On LAN (WOL) supported
I/O Control Via ITE IT8516E Embedded Controller via LPC Bus interface
Expansion •
1x PCIe x16 (Gen 2.0), 1x mPCIe (w. USB2.0) (KTH81/mITX)
Capabilities •
1x PCIe x16 (Gen 2.0 & 3.0), 1x mPCIe (w. USB2.0) (KTQ87/mITX)
•
1x PCIe x16 (Gen 2.0), 1x PCIe x2 (x16 slot), 1x PCIe x1 (KTH81/Flex)
•
1x PCIe x16 (Gen 2.0 & 3.0), 1x PCIe x4 (x16 slot), 1x PCIe x1 (KTQ87/Flex)
•
PCI (Flex only)
•
SMBus, compatible with ACCES BUS and I2C BUS, (via Feature connector)
•
SPI bus routed to SPI connector (BIOS Recovery module interface)
•
DDC/AUX Bus routed to DP connector (Auto detect to DDC when using passive DP to
HDMI or DVI adapters)
•
18 x GPIOs (General Purpose I/Os), (via Feature connector)
•
DAC, ADC, PWM and TIMER (Multiplexed), (via Feature connector)
•
WAKE UP / Interrupt Inputs (Multiplexed), (via Feature connector)
•
3 Wire Bus for GPIO Expansion (up to 152 GPIOs), (via Feature connector)
•
8 bit Timer output, (via Feature connector)
Hardware •
Smart Fan control system, support Thermal® and Speed® cruise for two on-board
Monitor Fan connectors: CPU Fan (on-board) and System Fan (on-board)
•
Subsystem Thermal inputs: CPU Die temperature (precision +/- 3ºC), System temperature
(precision +/- 3ºC)
•
Intrusion (Case Open) detect input, (via Feature connector)
•
Sleep S5# Indication, (via Feature connector)
•
System Powergood Signal, (via Feature connector)
Power ATX/BTX (w. ATX+12V) PSU, 24-pin and 4-pin
Supply Unit
Battery
Exchangeable 3.0V Lithium battery for on-board Real Time Clock and CMOS RAM.
Manufacturer Panasonic / Part-number CR-2032L/BN, CR2032N/BN or CR-2032L/BE.
Approximate 6.2 years retention.
Current draw is less than 4.2µA when PSU is disconnected and 0 µA in S0 – S5.
CAUTION: Danger of explosion if the battery is incorrectly replaced. Replace only
with the same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer's instructions.
Page 14
KTQ87/KTH81 Users Guide
System Specification