Basic Operation; Editing Regular Memory/Group Memory Channels - Icom IC-A220 Instruction Manual

Basic operation

■
[RCL] to enter the mem-
Push
q
ory mode.
• The memory channel number is
displayed.
• The memory channel name is also displayed if it has been en-
tered.
[O-DIAL] to select the
Rotate
w
memory channel types.
• For the group memory channel,
push [DIAL] and then rotate [O-
DIAL] to select a group.
[DIAL] to select the de-
Rotate
e
sired channel.
Push [RCL] to change standby
r
frequency to the selected fre-
quency and exit the memory
mode.
• For the group memory channel, push [RCL] twice to change
the standby frequency to the selected frequency and exit the
memory channel.
• Hold down [RCL] for two seconds to exit the memory mode with-
out changing the previously set standby frequency.
Push [ ] to exchange to the
t
active frequency.
MEMORY
118.00 127.00
5
CH01
GRP01
118.00 127.00
5
CH01
GRP02
118.00 128.10
5
CH02
118.00 128.10
5
128.10
118.00
5
MEMORY OPERATION
■ Editing Regular memory/
Group memory channels
D Memory mode menu
There are memory mode menus to edit the memory contents.
They contain the following items.
REPLACE (p. 9)
Enter the selected memory channel frequency to the standby
frequency.
DELETE (p. 9)
Deletes the selected memory channel frequency.
REVIVE
Returns the selected memory channel to its previous state.
CH NAME (For only regular memory channel)
Sets the channel name to the selected regular memory chan-
nel.
GRP NAME (For only group memory channel)
Sets the group name to the selected memory group.
CH TAG (For only group memory channel)
Sets the channel tag to the selected memory channel. (Se-
lecting the group memory channel is the only option.)
DONE
Returns to the memory mode.
3
03
8