Scanning The Weather Memory Channels - Icom IC-A220 Instruction Manual

4
OTHER FUNCTIONS
Scanning the
■
(For only U.S.A. version transceivers)
Scanning automatically searches for weather channel sig-
nals.
Repeatedly scans all weather memory channels.
You can set the interval time (scan speed) for the scan in the
Settings menu. Refer to page 22 for details.
[RCL] to enter the memory mode, and then rotate
Push
q
[O-DIAL] to select the weather memory channel.
[VOL] for two seconds to start a weather mem-
Hold down
w
ory channel scan.
• "SEARCH" blinks while scanning.
• To change the scan direction, turn [DIAL].
• The scan continues even when receiving a signal on the active
frequency.
When receiving a signal on the weather channel:
e
• "RX" blinks on the standby frequency display and the scan is
cancelled.
• "DUAL" is displayed on the active frequency display.
17
weather memory channels
RX WEATHER
122.00 162.55
5
SEARCH
RX DUAL WEATHER
RX
122.00 161.65
5
WX08
When no signal is received on the weather channel:
r
• "NO WTH" is displayed even searches "WX01" to "WX10" chan-
nels for three times and the scan is cancelled.
Hold down [VOL] for two seconds to cancel the scan man-
t
ually.