Clearing The Memory Contents; Enter Frequencies Into Memory Channels - Icom IC-A220 Instruction Manual

3
MEMORY OPERATION
D Enter frequencies into memory channels
To enter frequencies into memory channels, follow the steps
below.
[DIAL] and [O-DIAL] to set the desired frequency
Rotate
q
for the standby frequency.
Push [RCL] to enter the memory mode.
w
• The memory channel number is displayed.
• The memory channel name is also displayed if it has been en-
tered.
Rotate [O-DIAL] to select a desired memory channel.
e
• Select regular memory channels or group memory channels.
• For the group memory channel, push [DIAL] and then rotate
[O-DIAL] to select a group.
Push [MEM] and then ro-
r
tate [O-DIAL] to select
"REPLACE."
• The channel number blinks.
• For the group memory channel, push [DIAL], [MEM] and then
rotate [O-DIAL] to select "REPLACE."
Rotate [DIAL] to select a
t
channel to be entered.
Push [MEM] to enter the frequency into the channel.
y
• "WRITE COMPLETED" is displayed when the regular memory
channel is entered.
[RCL] to exit the memory mode.
Push
u
• For the group memory channel, hold down [RCL] for two sec-
onds to exit the memory mode.
9
MEMORY
128.000
122.00
REPLACE Ç
127.000
CH01
MEMORY
128.000
122.00
REPLACE Ç
127.000
CH02
D Clearing the memory contents
You can clear unwanted memory channels.
Push [RCL] to enter the memory mode.
q
• The memory channel number is displayed.
• The memory channel name is also displayed if it has been en-
tered.
[O-DIAL] to select a desired memory channel.
Rotate
w
• Select regular memory channels or group memory channels.
• For the group memory channels, push [DIAL] and then rotate
[O-DIAL] to select a group.
[DIAL] to select a desired channel.
Rotate
e
Push [MEM] and then rotate [O-DIAL] to select "DE-
r
LETE."
• The channel number blinks.
• For the group memory channel, push [DIAL], [MEM] and then
rotate [O-DIAL] to select "DELETE."
122.00
Push [MEM] to clear the memory channel data.
t
122.00
[RCL] to exit the memory mode.
Push
y
• For the group memory channel, hold down [RCL] for two sec-
onds to exit the memory mode.
MEMORY
127.000
ÅDELETE Ç
127.000
CH01
MEMORY
CH01