Precautions - Icom IC-A220 Instruction Manual

PRECAUTIONS

R WARNING! NEVER
an earphone or other audio accessories at high volume lev-
els. Continuous high volume operation may cause a ringing
in your ears. If you experience ringing, reduce the volume
level or discontinue use.
R WARNING! NEVER
AC outlet or to a power source of more than 28 V DC. Such a
connection will damage the transceiver.
CAUTION: NEVER
connect the transceiver to a power
source that is DC fused at more than 10 A. Accidental reverse
connection will be protected by this fuse, higher fuse values
will not give any protection against such accidents and the
transceiver will be damaged.
DO NOT
operate the transceiver near unshielded electric
blasting caps or in an explosive atmosphere.
DO NOT
connect the transceiver to a power source using
reverse polarity. This connection will not only blow fuses but
also may damage the transceiver.
DO NOT
place unit in a non-secure place to avoid inadver-
tent use by children.
operate the transceiver with
connect the transceiver to an
DO NOT
push the PTT when not actually intending to
transmit.
DO NOT
use or place the transceiver in direct sunlight
or in areas with temperatures below –20°C (–4°F) or above
+55°C (+131°F).
DO NOT
place the transceiver in excessively dusty envi-
ronments.
DO NOT
use harsh solvents such as benzine or alcohol to
clean the transceiver, as they will damage the transceiver's
surfaces. If the transceiver becomes dusty or dirty, wipe it
clean with a soft, dry cloth.
BE CAREFUL!
The transceiver will become hot when
operating continuously for long periods.
Use of 8.33 kHz Channel Spacing of this radio
CAUTION:
is strictly prohibited and shall not be used in Canada.
ii