4.4 Installing the DDR3 SDRAM Memory Module
The panel PC system provides one 204-pin SODIMM sockets and it is possible to
install 4 GB of DDR3 SDRAM memory.
1.
Remove rear cover, and remove heat sink(see Figure 4.6)
Figure 4.6 Placing the Memory Module in the SODIMM Socket
2.
Insert memory on memory slot, and stick a thermal pad on it(see Figure 4.7).
Then assemble heat sink back on system and assemble rear cover.
Figure 4.7 Stick the Thermal Pad on the Memory
19
PPC-3100 User Manual