Pcl Card Power Selection; Table 3.4:Pcl Card Power Selection; Connecting Power; Installing The Ddr Sdram Memory Module - Advantech ARK-5280 Series User Manual

3.6 PCl Card Power Selection

Table 3.4: PCl Card Power Selection
Function
+5V *
+3.3V
(*): means default setting of the jumper/function

3.7 Connecting Power

Connect the ARK-5280 to a 9~32.5 V
can either be from a power adapter or an in-house power source.

3.8 Installing the DDR SDRAM Memory Module

The ARK-5280 provides two 200-pin SODIMM (Small Outline Dual
Inline Memory Module) sockets and supports 2.5V DDR SDRAM*. You
can install from 64 MB to 1 GB of DDR SDRAM memory.
The procedure for installing the DDR SDRAM SODIMM into the ARK-
5280 is detailed below, please follow these steps carefully.
1. Disconnect the power cord.
2. Unscrew the two screws from the top cover and remove the top cover.
Pin Setting
1-2 closed*
2-3 closed
Figure 3.2: Disconnect the Power Cord
power source. The power source
DC
23 Chapter 3