Table of Contents
Advertisement
2.4 Running the BIOS Setup Program
The panel PC will be properly set up and configured by the dealer prior to delivery.
However, it may be necessary to use the panel PC's BIOS (Basic Input-Output Sys-
tem) setup program to change the system configuration information, such as the cur-
rent date and time, or the type of hard drive. The setup program is stored in read-only
memory (ROM). It can be accessed either when you turn on or reset the panel PC, by
pressing the 'Del' key on your keyboard immediately after powering on the computer.
The settings specified with the setup program are recorded in a special area of mem-
ory called "CMOS RAM". This memory is backed up by a battery so that it will not be
erased after turning off or resetting the system. Whenever the power is turned on, the
system reads the settings stored in CMOS RAM and compares them to the equip-
ment check conducted during the power on self-test (POST). If a problem occurs, an
error message will be displayed on screen, and the computer prompts the user to run
the setup program.
2.5 Installing System Software
Recent releases of operating systems from major vendors include setup programs
which load automatically and guide you through hard disk formatting and operating
system installation. The guidelines below will help determine the steps necessary to
install the operating system onto the panel PC hard drive.
Note!
Some distributors and system integrators may have already pre-
installed system software prior to shipment.
2.6 Installing the Drivers
After installing your system software, you will be able to set up the Chipset, Ethernet,
VGA, audio and touchscreen functions. All the drivers are stored in a CD-ROM disc
labeled "Drivers and Utilities". The CD-ROM can be found in your accessory box.
Note!
The drivers and utilities used for the PPC-3100 panel PCs are subject to
change without notice. If in doubt, check Advantech's website or contact
our application engineers for the latest information regarding drivers util-
ities.
PPC-3100 User Manual
Figure 2.7 Drivers and Utilities on the CD-ROM
10
Advertisement
Table of Contents
