Snmp Shell - Funkwerk bintec R230a User Manual

Access and Configuration
Menu
ATM
Q S
O
L2TP
C
ONFIGURATION
M
ANAGEMENT
M
ONITORING AND
D
EBUGGING
E
XIT
Table 4-5: Setup Tool Menus
4.3

SNMP Shell

➤➤
SNMP (Simple Network Management) is a
how to access the configuration settings.
All configuration settings are stored in the so-called
formation Base) as MIB tables and MIB variables. You can access these set-
Function
In this menu you perform the configuration of
ATM profiles required by all ADSL connections
as well as connection monitoring (OAM) and
ATM QoS.
In this menu you configure all settings for Qual-
ity of Service.
In this menu you configure the use of L2TP
(Layer 2 Tunneling Protocol).
In this menu you can administrate your gate-
way's configuration files. You can save them
e.g. either locally on your gateway or on your
PC.
Includes submenus that enable you to locate
problems in your network and monitor activities,
e.g. at your gateway's WAN interface.
Quit the Setup Tool with E
configuration file in the flash memory with
➜
E Save as boot configuration and exit.
XIT
This file is loaded on restarting your gateway.
Leave the Setup Tool without saving the config-
uration in the flash memory with E
without saving.
➤➤
protocol, that defines
➤➤
Configuration Options
. You save the
XIT
➜
Exit
XIT
MIB (Management In-
bintec User's Guide
4
29