Login; User Names And Passwords In Ex Works State - Funkwerk bintec R230a User Manual

Access and Configuration
3

Login

By means of predefined access data you can log in to your gateway and
carry out different operations. The range of the operations allowed is lim-
ited according to the authorizations of the respective user.
For each access option, first the login prompt is displayed. Without authorization
you cannot read any information on your gateway nor modify the configuration.
You do not need to log in to read the basic information which is displayed on the
HTTP status page. You can open it via LAN by entering the IP address of the
gateway (in ex works state: 192.168.0.254) into a web browser.
3.1 User Names and Passwords in Ex
Works State
Following user names and passwords are preconfigured on your gateway:
User name Password
admin bintec
write public
read public
http bintec
Table 3-1:

User names and passwords in ex works state

Authorizations
Read and change system variables,
save configurations, use the Setup
Tool.
Read and write system variables
(except passwords) (changes are lost
when you switch off your gateway).
Read system variables (except pass-
words).
Open the system variables pages via
the HTTP status page of your gate-
way, only read system variables
(except passwords).
bintec User's Guide
3
Login
13