Note
Access and Configuration
4
Configuration Options
This chapter contains not only an overview of the different tools you can
use for the configuration of your gateway, but also an introduction to the
application of the Setup Tool.
The following configuration options are available:
■
HTML Wizard
(page
■
Setup Tool
(page
19)
■
SNMP shell commands
■
Configuration Manager
The availability of the configuration options depends on the type of connection
to your gateway:
Type of connection
LAN
Serial connection
Table 4-1:
Connection and configuration options
For each type of connection several configuration options are hence available.
You must login as admin to be able to modify the configuration! Configuration
modification is impossible without knowing the respective password. This
applies for all configuration options.
4.1
HTML Wizard
The Quick Install Guide contains a short description of the configuration
by means of the
HTML
Wizard. It is required for the basic configuration of
your gateway and suitable if you can address your gateway from your
17)
(page
29)
and other SNMP manager
Possible configuration options
HTML
Wizard, HTML Setup Tool, ASCII Wiz-
ard, ASCII Setup Tool, Configuration Manager,
Shell commands
ASCII WIzard, ASCII Setup, Shell commands
Configuration Options
(page
30)
bintec User's Guide
17
4