ToDo
Windows
Unix
Access and Configuration
Example for a command line to use tip: tip -9600 /dev/ttyS1
2.2
Access via LAN
Accessing your gateway via one of the Ethernet interfaces provides the
possibility to configure the gateway via HTML user interface. The HTML-
Wizard is the easiest configuration option.
2.2.1
Telnet
You can access the SNMP shell not only via a web browser but also via a Telnet
connection so that you can adjust additional configuration settings as described
in the chapter
"Configuration Options" on page
You do not need any further software on your PC to set up a Telnet connection
to your gateway: Telnet is a standard tool of all operating systems.
Take the following steps:
1. Click Run... in the Windows start menu.
2. Enter telnet <IP address of your gateway>.
3. Click OK.
The login prompt window is displayed. You have now accessed the SNMP shell
of your gateway.
4. Continue with
"Login for Configuration" on page
Under UNIX and Linux you can set up a Telnet connection as well:
1. Enter telnet <IP address of your gateway> in a terminal.
The login prompt window is displayed. You have now accessed the SNMP shell
of your gateway.
2. Continue with
"Login for Configuration" on page
Access Options
17.
14.
14.
bintec User's Guide
2
9