Login For Configuration - Funkwerk bintec R230a User Manual

3
Login
14 bintec User's Guide
It is possible to modify and save the configuration only if you login with the user
name admin. As well the access data (user names and passwords) can only
be modified if the user logs in as admin. The passwords are not displayed in
plain text in the Setup Tool for safety reasons, but are visible as asteriks. The
user names, however, are written in plain text.
For safety reasons with the user name read you can read all configuration set-
tings except the access data. Thus it is impossible to login with read, then read
the password of the user admin and afterwards login as admin to modify the
configuration.
3.2

Login for Configuration

ToDo Setup a connection to the gateway by one of the access options described in
chapter "Access Options" on page
How you log in to the SNMP shell:
1. Enter your user name , e.g. admin, and confirm with Enter.
2. Enter your password, e.g. bintec, and confirm with Enter.
Your gateway answers with the login prompt, e.g. r232bw:> . Login has been
successfully completed. You now accessed the SNMP shell.
How to login via the HTML user interface:
1. Enter your user name into the field User name of the login window.
2. Enter your password into the field Password of the login window.
The HTTP status page of the gateway opens in the browser and displays the
available options.
7.
Access and Configuration