Setup Tool - Funkwerk bintec R230a User Manual

ToDo
Access and Configuration
4.2

Setup Tool

The Setup Tool is a menu-driven tool for configuration and administration
of your gateway. The configuration with the Setup Tool is much easier and
more transparent than the configuration with SNMP commands, whilst of-
fering the same access option to all relevant parameters like the SNMP
commands.
Like in the Wizard you can start two versions of the Setup Tool:
■
As HTML page in each web browser currently available with activated Jav-
ascript. In the Quick Install Guide, you find a short description of how to
start the HTML Setup Tool (printed version included in delivery size or avail-
able on the Companion
■
As ASCII Version. The access to this version is desribed as follows.
The two versions of the Setup Tool differ in presentation but include the same
functionalities.
You can start the ASCII version of the Setup Tool with any connection to the
gateway: connection via LAN or via serial interface.
Take the following steps to start the Setup Tool session:
1. Log in to your gateway as admin
page 14).
2. After the command prompt enter setup and press Enter.
The root menu of the ASCII Setup Tools is displayed.
Setup Tool menu
Depending on the type of your
Setup Tool menu is devided into three sections:
■
The menu line contains a navigation help that displays the menu of the Set-
up Tool you are currently editing. Additionally, the system name of your
gateway is displayed which helps especially when you configure several
bintec gateways with different system names.
CD).
(see "Login for Configuration" on
R Series gateway the root menu can differ. The
Configuration Options
bintec User's Guide 19
4