IEI Technology AFL-W19A User Manual
  1. Manuals
  2. Brands
  3. IEI Technology Manuals
  4. Touch Panel
  5. AFL-W19A
  6. User manual

IEI Technology AFL-W19A User Manual

Panel pc with touch screen intel cpu gigabit ethernet, usb, audio, rs-232/422/485, sata rohs compliant, ip64 protection
Hide thumbs Also See for AFL-W19A:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual
AFL-W19A/17D/W15A-N270 Panel PC
IEI Technology Corp.
MODEL:
AFL-W19A/17D/W15A-N270
Panel PC with Touch Screen Intel® CPU
Gigabit Ethernet, USB, Audio, RS-232/422/485, SATA
RoHS Compliant, IP64 Protection

User Manual

Page i
Rev. 3.00 – 25 June, 2013

Advertisement

Table of Contents
loading

Related Manuals for IEI Technology AFL-W19A

Summary of Contents for IEI Technology AFL-W19A

  • Page 1: User Manual

    AFL-W19A/17D/W15A-N270 Panel PC IEI Technology Corp. MODEL: AFL-W19A/17D/W15A-N270 Panel PC with Touch Screen Intel® CPU Gigabit Ethernet, USB, Audio, RS-232/422/485, SATA RoHS Compliant, IP64 Protection User Manual Page i Rev. 3.00 – 25 June, 2013...
  • Page 2 AFL-W19A/17D/W15A-N270 Panel PC Revision Date Version Changes 25 June, 2013 3.00 Updated for R30 version Removed AFL-W19B-N270 Changed the model name from AFL-W19A/W19B/17D/W15A-N270 to AFL-W19A/17D/W15A-N270 29 February, 2012 2.20 Updated for R22 version (Bluetooth function optional) 29 June, 2011 1.06...
  • Page 3 AFL-W19A/17D/W15A-N270 Panel PC Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.

  • Page 4: Table Of Contents

    2.4 C ® I ................14 OMPACT LASH NSTALLATION 2.4.1 AFL-17D-N270 CompactFlash® Installation ..........15 2.4.2 ALF-W15A-N270/AFL-W19A-N270 CompactFlash® Installation ....15 2.5 J ....................17 UMPER ETTINGS 2.5.1 Access the Jumpers ..................18 2.5.2 Preconfigured Jumpers ..................18 2.5.3 CF Card Setup ....................18 2.5.4 Clear CMOS Jumper..................
  • Page 5 OUNTING THE YSTEM 2.6.1 Monitor Stand ....................26 2.6.2 Cabinet and Rack..................... 26 2.6.3 Arm Mounting ....................28 2.6.4 Wall Mounting....................30 2.6.5 Panel Mounting (AFL-17D-N270/AFL-W19A-N270) ........33 2.6.6 Panel Mounting (AFL-W15A-N270)..............35 2.7 B ................. 37 OTTOM ANEL ONNECTORS 2.7.1 LAN Connection....................
  • Page 6 AFL-W19A/17D/W15A-N270 Panel PC 3.3.7.1 USB Mass Storage Device Configuration..........71 3.4 PCI/P P........................72 3.5 B ........................75 3.5.1 Boot Settings Configuration................75 3.5.2 Boot Device Priority ..................78 3.5.3 Hard Disk Drives ..................... 79 3.5.4 Removable Drives .................... 79 3.5.5 CD/DVD Drives ....................
  • Page 7 AFL-W19A/17D/W15A-N270 Panel PC F HAZARDOUS MATERIALS DISCLOSURE............112 F.1 H IPB P AZARDOUS ATERIALS ISCLOSURE ABLE FOR RODUCTS ERTIFIED AS HS C 2002/95/EC W ........113 OMPLIANT NDER ITHOUT ERCURY Page vii...

  • Page 8: List Of Figures

    Figure 1-3: Rear Panel........................4 Figure 1-4: Bottom Panel .......................5 Figure 1–5: AFL-W15A-N270 Dimensions ..................7 Figure 1–6: AFL-17D-N270 Dimensions ..................8 Figure 1–7: AFL-W19A-N270 Dimensions ..................9 Figure 2-1: Aluminum Back Cover Retention Screws ..............13 Figure 2-2: HDD Bracket ......................14 Figure 2–3: HDD Installation......................14 Figure 2–4: Remove CompactFlash®...
  • Page 9 AFL-W19A/17D/W15A-N270 Panel PC Figure 2-24: AFL-17D-N270 Cutout .....................34 Figure 2-25: AFL-W19A-N270 Cutout..................34 Figure 2-26: Tighten the Panel Mounting Clamp Screws ............35 Figure 2-27: AFL-W15A-N270 Cutout..................36 Figure 2-28: Tighten the Panel Mounting Clamp Screws ............37 Figure 2-29: Connectors ......................37 Figure 2-30: LAN Connection ......................38 Figure 2-31: Serial Device Connector..................39...
  • Page 10 AFL-W19A/17D/W15A-N270 Panel PC List of Tables Table 1-1: System Specifications....................6 Table 2-1: Packing List.........................13 Table 2-2: Jumpers ........................17 Table 2-3: Preconfigured Jumpers .....................18 Table 2-4: CF Card Setup Jumper Settings ................19 Table 2-5: Clear CMOS Jumper Settings..................20 Table 2-6: COM1 Pin 9 Setting Jumper Settings ...............21 Table 2-7: COM3 Pin 9 Setting Jumper Settings ...............21...
  • Page 11 AFL-W19A/17D/W15A-N270 Panel PC BIOS Menus BIOS Menu 1: Main ........................46 BIOS Menu 2: Advanced ......................47 BIOS Menu 3: CPU Configuration ....................48 BIOS Menu 4: IDE Configuration....................49 BIOS Menu 5: IDE Master and IDE Slave Configuration ............50 BIOS Menu 6: Super IO Configuration..................55 BIOS Menu 7: Hardware Health Configuration ................58...

  • Page 12: Introduction

    AFL-W19A/17D/W15A-N270 Panel PC Chapter Introduction Page 1...

  • Page 13: Overview

    AFL-W19A/17D/W15A-N270 Panel PC 1.1 Overview Figure 1-1: AFL-W19A/17D/W15A-N270 The Afolux panel PCs are all-in-one panel PCs with all the elements of a desktop computer contained in a single, slim package, no bigger than a thick monitor. The Afolux panel PCs can be mounted on a desktop monitor stand and save a huge amount of desktop space by including all the computer components behind the screen.

  • Page 14: Features

    IP64 protection RoHS compliant 1.4 External Overview The AFL-W19A/17D/W15A-N270 consists of a screen and rear panel that covers the back, sides and top. The rear panel contains a smaller access panel, all the cable connections and the mounting holes. 1.4.1 Front Panel The front side of the AFL-W19A/17D/W15A-N270 is a flat panel LCD screen surrounded by a plastic frame.

  • Page 15: Rear Panel

    AFL-W19A/17D/W15A-N270 Panel PC Figure 1-2: Front Panel 1.4.2 Rear Panel The rear panel provides access to retention screw holes that support the wall mounting. Refer to Figure 1-3. Figure 1-3: Rear Panel Page 4...

  • Page 16: Bottom Panel

    AFL-W19A/17D/W15A-N270 Panel PC 1.4.3 Bottom Panel The bottom panel has the following slots, buttons and switches (Figure 1-4): 2 x Gigabit LAN 1 x Line output (audio) 1 x OSD keypad 1 x Power switch 1 x Power input (12 V)

  • Page 17: Specifications

    AFL-W19A/17D/W15A-N270 Panel PC 1.6 Specifications The technical specifications for the AFL-W19A/17D/W15A-N270 systems are listed in Table 1-1. SPECIFICATION AFL-W15A-N270 AFL-17D-N270 AFL-W19A-N270 Mainboard AFLMB2-945GSE-N270 1.6 GHz Intel® Atom™ N270 LCD Panel 15.6" 17" 19" Resolution 1366 x 768 1280 x 1024...

  • Page 18: Dimensions

    AFL-W19A/17D/W15A-N270 Panel PC 1.7 Dimensions 1.7.1 AFL-W15A-N270 Dimensions Figure 1–5: AFL-W15A-N270 Dimensions Page 7...

  • Page 19: Afl-17D-N270 Dimensions

    AFL-W19A/17D/W15A-N270 Panel PC 1.7.2 AFL-17D-N270 Dimensions Figure 1–6: AFL-17D-N270 Dimensions Page 8...

  • Page 20: Afl-W19A-N270 Dimensions

    AFL-W19A/17D/W15A-N270 Panel PC 1.7.3 AFL-W19A-N270 Dimensions Figure 1–7: AFL-W19A-N270 Dimensions Page 9...

  • Page 21: Installation

    AFL-W19A/17D/W15A-N270 Panel PC Chapter Installation Page 10...

  • Page 22: Unpack The Panel Pc

    AFL-W19A/17D/W15A-N270 Panel PC WARNING: When installing the AFL-W19A/17D/W15A-N270, make sure to: Turn the power off: Chance of electrocution. Turn off the monitor and unplug it from the power supply. Only let certified engineers change the hardware settings: Incorrect settings can cause irreparable damage to the product.

  • Page 23: Packing List

    Lift the monitor out of the boxes. Step 5: Remove the peripheral parts box from the main box. Step 6: S t e p 0 : 2.2 Packing List The AFL-W19A/17D/W15A-N270 flat panel PC is shipped with the following components: Quantity Item Image AFL-W19A/17D/W15A-N270 Power adapter...

  • Page 24: Hard Drive Installation

    If any of these items are missing or damaged, contact the distributor or sales representative immediately. 2.3 Hard Drive Installation This section outlines the installation of the hard drive in the AFL-W19A/17D/W15A-N270. To install the hard drive, please follow the steps below: Remove the plastic back cover.

  • Page 25: Compactflash® Installation

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2-2: HDD Bracket Locate the HDD bracket. Step 4: Insert the SATA connector end of the HDD into the bracket to connect the Step 5: motherboard SATA connector to the hard drive SATA connector as shown in the figure below.

  • Page 26: Afl-17D-N270 Compactflash® Installation

    Step 3: Figure 2–5: CompactFlash® Install Slide the cover back on, then fasten the screw.S t e p 0 : Step 4: 2.4.2 ALF-W15A-N270/AFL-W19A-N270 CompactFlash® Installation Locate the CompactFlash® slot as shown in the figure below. Step 1: Page 15...

  • Page 27: Figure 2-6: Compactflash® Slot Location

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2–6: CompactFlash® Slot Location Install the CompactFlash® card into the slot (see figure below). Step 2: Figure 2–7: CompactFlash® Install Replace the cover and screws.S t e p 0 : Step 3: Page 16...

  • Page 28: Jumper Settings

    The following jumpers can be found on the motherboard installed in the AFL-W19A/17D/W15A-N270. Before the AFL-W19A/17D/W15A-N270 is installed, the jumpers must be set in accordance with the desired configuration. The jumpers on the AFL-W19A/17D/W15A-N270 motherboard are listed in Table 2-2.

  • Page 29: Access The Jumpers

    2.5.2 Preconfigured Jumpers WARNING: Do not change the settings on the jumpers in described here. Doing so may disable or damage the system. The following jumpers are preconfigured for the AFL-W19A/17D/W15A-N270. Users should no change these jumpers (Table 2-3). Jumper Name Label...

  • Page 30: Clear Cmos Jumper

    See Figure 2-9 Jumper Location: If the AFL-W19A/17D/W15A-N270 fails to boot due to improper BIOS settings, the clear CMOS jumper clears the CMOS data and resets the system BIOS information. To do this, use the jumper cap to close the pins for a few seconds then remove the jumper clip.

  • Page 31: Com Port Pin 9 Select

    AFL-W19A/17D/W15A-N270 Panel PC After having done one of the above, save the changes and exit the CMOS Setup menu. The clear CMOS jumper settings are shown in Table 2-5. Clear CMOS Description Short 1 - 2 Keep CMOS Setup Short 2 - 3...

  • Page 32: Com3 Rx Function Select Jumper

    AFL-W19A/17D/W15A-N270 Panel PC Description Short 1-2 COM1 RI Pin use +12 V Short 3-4 COM1 RI Pin use RI Short 5-6 COM1 RI Pin use +5 V Table 2-6: COM1 Pin 9 Setting Jumper Settings Description Short 1-2 COM3 RI Pin use +12 V...

  • Page 33: Com3 Tx Function Select Jumper

    AFL-W19A/17D/W15A-N270 Panel PC The COM3 RX Function Select jumper sets the communication protocol used by the RX serial communications port COM3 as RS-232, RS-422 or RS-485. The COM3 RX Function Select jumper settings are shown in Table 2-8. COM3 RX Function Select...

  • Page 34: Com3 Rs-232/422/485 Serial Port Select Jumper

    AFL-W19A/17D/W15A-N270 Panel PC COM3 TX Function Select Description Short 1 – 3 RS-422 Short 2 – 4 RS-422 Short 3 – 5 RS-485 Short 4 – 6 RS-485 Table 2-9: COM3 TX Function Select Jumper Settings The COM3 TX Function Select jumper location is shown in Figure 2-12 below.

  • Page 35: Figure 2-13: Com3 Rs-232/422/485 Serial Port Select Jumper Location

    AFL-W19A/17D/W15A-N270 Panel PC The COM3 RS-232/422/485 Serial Port Select jumper sets the communication protocol used by the second serial communications port (COM3) as RS-232, RS-422 or RS-485. The COM3 RS-232/422/485 Serial Port Select settings are shown in Table 2-10. RS-232/485 Select...

  • Page 36: Com3 Rs-422 And Rs-485 Pinouts

    The following installation options are available: 2.6.1 Monitor Stand ..................26 2.6.2 Cabinet and Rack ................26 2.6.3 Arm Mounting ..................28 2.6.4 Wall Mounting ..................30 2.6.5 Panel Mounting (AFL-17D-N270/AFL-W19A-N270) ......33 2.6.6 Panel Mounting (AFL-W15A-N270)............. 35 Page 25...

  • Page 37: Monitor Stand

    Figure 2-14: Monitor Stand 2.6.2 Cabinet and Rack The AFL-W19A/17D/W15A-N270 flat panel PC can be installed into a cabinet or rack. The installation procedures are similar to the panel mounting installation. To do this, please follow the steps below:...

  • Page 38: Figure 2-15: The Rack/Cabinet Bracket

    AFL-W19A/17D/W15A-N270 Panel PC Slide the rear of the AFL-W19A/17D/W15A-N270 flat panel PC through the Step 1: rack/cabinet bracket until the aluminum frame is flush against the front of the bracket (Figure 2-15). Figure 2-15: The Rack/Cabinet Bracket Insert the rack mounting clamps into the pre-formed holes along the edges of Step 2: the flat panel PC, behind the ABS/PC plastic frame.

  • Page 39: Arm Mounting

    (Figure 2-17). 2.6.3 Arm Mounting The AFL-W19A/17D/W15A-N270 can be installed on any arm that supports the standard VESA mounting interface. An example wall arm is shown below. Page 28...

  • Page 40: Figure 2-18: Wall Arm

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2-18: Wall Arm To install the AFL-W19A/17D/W15A-N270 on the arm, follow the directions below. NOTE: Make sure the arm supports standard VESA mounting. The AFL-W19A/17D/W15A-N270 uses a VESA mounting to attach to the arm. The arm is purchased separately. Follow the instructions in the arm's user Step 1: manual to securely attach the arm to the wall.

  • Page 41: Wall Mounting

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2-19: Arm Mounting Retention Screw Holes Secure the flat panel PC to the interface pad by inserting four retention screws Step 4: through the bottom of the mounting arm interface pad and into the flat panel PC.

  • Page 42: Figure 2-21: Wall-Mounting Bracket

    AFL-W19A/17D/W15A-N270 Panel PC Drill four pilot holes at the marked locations on the wall for the bracket retention Step 3: screws. Align the wall-mounting bracket screw holes with the pilot holes. Step 4: Secure the mounting-bracket to the wall by inserting the retention screws into Step 5: the four pilot holes and tightening them (Figure 2-21).

  • Page 43: Figure 2-22: Chassis Support Screws

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2-22: Chassis Support Screws NOTE: In the diagram below the bracket is already installed on the wall. Secure the panel PC by fastening the retention screw of the wall-mounting Step 9: bracket. (Figure 2-23). Page 32...

  • Page 44: Panel Mounting (Afl-17D-N270/Afl-W19A-N270)

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2-23: Secure the Panel PC 2.6.5 Panel Mounting (AFL-17D-N270/AFL-W19A-N270) To mount the panel PC into a panel, please follow the steps below. Select the position on the panel to mount the flat panel PC. Step 1: Cut out a section corresponding to the size shown below.

  • Page 45: Figure 2-24: Afl-17D-N270 Cutout

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2-24: AFL-17D-N270 Cutout Figure 2-25: AFL-W19A-N270 Cutout Slide the flat panel PC through the hole until the aluminum frame is flush against Step 3: the panel. Page 34...

  • Page 46: Panel Mounting (Afl-W15A-N270)

    (Figure 2-26). Figure 2-26: Tighten the Panel Mounting Clamp Screws 2.6.6 Panel Mounting (AFL-W15A-N270) To mount the AFL-W19A/17D/W15A-N270 flat panel PC into a panel, please follow the steps below. Select the position on the panel to mount the flat panel PC.

  • Page 47: Figure 2-27: Afl-W15A-N270 Cutout

    AFL-W19A/17D/W15A-N270 Panel PC large enough for the rear panel of the flat panel PC to fit through. Recommended cutout size shown below. Figure 2-27: AFL-W15A-N270 Cutout Slide the flat panel PC through the hole until the aluminum frame is flush against Step 3: the panel.

  • Page 48: Bottom Panel Connectors

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2-28: Tighten the Panel Mounting Clamp Screws 2.7 Bottom Panel Connectors The bottom panel connectors extend the capabilities of the panel PC but are not essential for operation (except power). Figure 2-29: Connectors 2.7.1 LAN Connection The RJ-45 connectors enable connection to an external network.

  • Page 49: Serial Device Connection

    AFL-W19A/17D/W15A-N270. Follow the steps below to connect a serial device to the AFL-W19A/17D/W15A-N270 panel PC. Locate the DB-9 connector. The location of the DB-9 connector is shown in Step 1: Chapter 2. Insert the serial connector. Insert the DB-9 connector of a serial device into Step 2: the DB-9 connector on the bottom panel.

  • Page 50: Usb Device Connection

    Step 0: 2.7.3 USB Device Connection To connect USB devices to the AFL-W19A/17D/W15A-N270, please follow the instructions below. Located the USB connectors. The locations of the USB connectors are shown Step 1: in Chapter 2.

  • Page 51: Vga Monitor Connection

    2.7.4 VGA Monitor Connection The VGA output can be connected to an external VGA monitor. To connect the VGA monitor to the AFL-W19A/17D/W15A-N270, please follow the instructions below. Locate the female DB-15 connector. The location of the female DB-15 Step 1: connector is shown in Chapter 3.

  • Page 52: Power Connection

    AFL-W19A/17D/W15A-N270 Panel PC Figure 2-33: VGA Connector Secure the connector. Secure the DB-15 VGA connector from the VGA Step 4: monitor to the external interface by tightening the two retention screws on either side of the connector. Step 0: 2.8 Power Connection The power cable connects the panel PC to the power supply.
  • Page 53 AFL-W19A/17D/W15A-N270 Panel PC Chipset driver Graphics driver LAN driver Audio driver Touch panel driver Keypad utility driver Wireless LAN card driver Bluetooth driver (optional) Page 42...

  • Page 54: Bios Setup

    AFL-W19A/17D/W15A-N270 Panel PC Chapter BIOS Setup Page 43...

  • Page 55: Introduction

    AFL-W19A/17D/W15A-N270 Panel PC 3.1 Introduction The BIOS is programmed onto the BIOS chip. The BIOS setup program allows changes to certain system settings. This chapter outlines the options that can be changed. 3.1.1 Starting Setup The AMI BIOS is activated when the computer is turned on. The setup program can be activated in one of two ways.

  • Page 56: Getting Help

    AFL-W19A/17D/W15A-N270 Panel PC Function F2 /F3 key Change color from total 16 colors. F2 to select color forward. F10 key Save all the CMOS changes, only for Main Menu Table 3-1: BIOS Navigation Keys 3.1.3 Getting Help When F1 is pressed a small help window describing the appropriate keys to use and the possible selections for the highlighted item appears.

  • Page 57: Main

    AFL-W19A/17D/W15A-N270 Panel PC 3.2 Main The Main BIOS menu (BIOS Menu 1) appears when the BIOS Setup program is entered. The Main menu gives an overview of the basic system information. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset...

  • Page 58: Advanced

    AFL-W19A/17D/W15A-N270 Panel PC The System Overview field also has two user configurable fields: System Time [xx:xx:xx] Use the System Time option to set the system time. Manually enter the hours, minutes and seconds. System Date [xx/xx/xx] Use the System Date option to set the system date. Manually enter the day, month and year.

  • Page 59: Cpu Configuration

    AFL-W19A/17D/W15A-N270 Panel PC 3.3.1 CPU Configuration Use the CPU Configuration menu (BIOS Menu 3) to view detailed CPU specifications and configure the CPU. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit Configure Advanced CPU Settings Module Version:3F.12 ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...

  • Page 60: Ide Configuration

    AFL-W19A/17D/W15A-N270 Panel PC 3.3.2 IDE Configuration Use the IDE Configuration menu (BIOS Menu 4) to change and/or set the configuration of the IDE devices installed in the system. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit IDE Configuration Options ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...

  • Page 61: Ide Master, Ide Slave

    AFL-W19A/17D/W15A-N270 Panel PC Only the IDE drives are enabled. SATA drives are PATA Only disabled Configure SATA as [IDE] Use the Configure SATA as option to configure SATA devices as normal IDE devices. Configures SATA devices as normal IDE device.

  • Page 62: Type [Auto]

    AFL-W19A/17D/W15A-N270 Panel PC Type: Indicates the type of devices a user can manually select Vendor: Lists the device manufacturer Size: List the storage capacity of the device. LBA Mode: Indicates whether the LBA (Logical Block Addressing) is a method of addressing data on a disk drive is supported or not.

  • Page 63: Lba/Large Mode [Auto]

    AFL-W19A/17D/W15A-N270 Panel PC This option specifies an ATAPI Removable Media ARMD Device. These include, but are not limited to: LS-120 LBA/Large Mode [Auto] Use the LBA/Large Mode option to disable or enable BIOS to auto detects LBA (Logical Block Addressing). LBA is a method of addressing data on a disk drive. In LBA mode, the maximum drive capacity is 137 GB.

  • Page 64: Dma Mode [Auto]

    AFL-W19A/17D/W15A-N270 Panel PC BIOS auto detects the PIO mode. Use this value if the IDE disk Auto EFAULT drive support cannot be determined. PIO mode 0 selected with a maximum transfer rate of 3.3 MB/s PIO mode 1 selected with a maximum transfer rate of 5.2 MB/s PIO mode 2 selected with a maximum transfer rate of 8.3 MB/s...

  • Page 65: Auto]

    AFL-W19A/17D/W15A-N270 Panel PC Ultra DMA mode 1 selected with a maximum data transfer UDMA1 rate of 25 MB/s Ultra DMA mode 2 selected with a maximum data transfer UDMA2 rate of 33.3 MB/s Ultra DMA mode 3 selected with a maximum data transfer...

  • Page 66: Super Io Configuration

    AFL-W19A/17D/W15A-N270 Panel PC 3.3.3 Super IO Configuration Use the Super IO Configuration menu (BIOS Menu 6) to set or change the configurations for the FDD controllers, parallel ports and serial ports. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset...

  • Page 67: Serial Port3 Address [3E8]

    AFL-W19A/17D/W15A-N270 Panel PC Serial Port3 Address [3E8] Selects the serial port base address. No base address Disabled I/O address 3E8 EFAULT I/O address 2E8 I/O address 2F0 I/O address 2E0 Serial Port3 IRQ [11] Selects the serial port interrupt address.

  • Page 68: Serial Port5 Address [2F0]

    AFL-W19A/17D/W15A-N270 Panel PC IRQ address 11 EFAULT Serial Port5 Address [2F0] Selects the serial port base address. No base address Disabled I/O address 2F0 EFAULT Serial Port5 IRQ [10] Use the Serial Port5 IRQ option to select the interrupt address for serial port 5.

  • Page 69: Hardware Health Configuration

    AFL-W19A/17D/W15A-N270 Panel PC 3.3.4 Hardware Health Configuration The Hardware Health Configuration menu (BIOS Menu 7) shows the operating temperature, fan speeds and system voltages. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit Hardware Health Event Monitoring ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...

  • Page 70: Temp. Limit Of Off [000]

    AFL-W19A/17D/W15A-N270 Panel PC The fan adjusts its speed using these settings: Automatic mode Temp. Limit of OFF Temp. Limit of Start Fan Start PWM Slope PWM 1 The fan spins at the speed set in: PWM Manual mode Fan PWM control Temp.

  • Page 71: Slope Pwm [1 Pwm]

    AFL-W19A/17D/W15A-N270 Panel PC PWM Maximum Mode: 127 Slope PWM [1 PWM] A bigger value will increase the fan speed in big amounts. A smaller value will increase the speed more gradually. 0 PWM 1 PWM 2 PWM 4 PWM 8 PWM...

  • Page 72: Power Configuration

    AFL-W19A/17D/W15A-N270 Panel PC +3.30V +5.00V +12.0V +1.5V +1.8V 3.3.5 Power Configuration The Power Configuration menu (BIOS Menu 8) allows the advanced power management options to be configured. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit > ACPI Configuration >...

  • Page 73: Acpi Settings

    AFL-W19A/17D/W15A-N270 Panel PC 3.3.5.1 ACPI Settings Use the ACPI Settings menu (BIOS Menu 9) to select the ACPI state when the system is suspended. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit ACPI Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Suspend Mode...

  • Page 74: Apm Configuration

    AFL-W19A/17D/W15A-N270 Panel PC 3.3.5.2 APM Configuration The APM Configuration menu (BIOS Menu 10) allows the advanced power management options to be configured. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit APM Configuration If the AT/ATX jumper ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...

  • Page 75: Resume On Keyboard/Mouse [Disabled]

    AFL-W19A/17D/W15A-N270 Panel PC When the power button is pressed the system goes into Suspend suspend mode Resume on Keyboard/Mouse [Disabled] Use the Resume on Keyboard/Mouse BIOS option to enable activity on either the keyboard or mouse to rouse the system from a suspend or standby state. That is, the system is roused when the mouse is moved or a button on the keyboard is pressed.

  • Page 76: Remote Access Configuration

    AFL-W19A/17D/W15A-N270 Panel PC The real time clock (RTC) cannot generate a wake Disabled EFAULT event If selected, the following appears with values that Enabled can be selected: RTC Alarm Date (Days) System Time After setting the alarm, the computer turns itself on from a suspend state when the alarm goes off.

  • Page 77: Serial Port Number [Com1]

    AFL-W19A/17D/W15A-N270 Panel PC Remote access is disabled. Disabled EFAULT Remote access configuration options shown below Enabled appear: Serial Port Number Serial Port Mode Flow Control Redirection after BIOS POST Terminal Type VT-UTF8 Combo Key Support These configuration options are discussed below.

  • Page 78: Flow Control [None]

    AFL-W19A/17D/W15A-N270 Panel PC 19200 8,n,1 09600 8,n,1 NOTE: Identical baud rate setting musts be set on the host (a management computer running a terminal software) and the slave Flow Control [None] Use the Flow Control option to report the flow control method for the console redirection application.

  • Page 79: Vt-Utf8 Combo Key Support [Disabled]

    AFL-W19A/17D/W15A-N270 Panel PC The target terminal type is VT-UTF8 VT-UTF8 VT-UTF8 Combo Key Support [Disabled] Use the VT-UFT8 Combo Key Support option to enable additional keys that are not provided by VT100 for the PC 101 keyboard. The VT100 Terminal Definition is the standard convention used to configure and conduct emergency management tasks with UNIX-based servers.

  • Page 80: Usb Configuration

    AFL-W19A/17D/W15A-N270 Panel PC 3.3.7 USB Configuration Use the USB Configuration menu (BIOS Menu 12) to read USB configuration information and configure the USB settings. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit USB Configuration Options ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Disabled Module Version –...

  • Page 81: Usb 2.0 Controller [Enabled]

    AFL-W19A/17D/W15A-N270 Panel PC USB 2.0 Controller [Enabled] Use the USB 2.0 Controller BIOS option to enable or disable the USB 2.0 controller USB 2.0 controller disabled Disabled USB 2.0 controller enabled Enabled EFAULT Legacy USB Support [Enabled] Use the Legacy USB Support BIOS option to enable USB mouse and USB keyboard support.

  • Page 82: Usb Mass Storage Device Configuration

    AFL-W19A/17D/W15A-N270 Panel PC 3.3.7.1 USB Mass Storage Device Configuration Use the USB Mass Storage Device Configuration menu (BIOS Menu 13) to configure USB mass storage class devices. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit USB Mass Storage Device Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...

  • Page 83: Pci/Pnp

    AFL-W19A/17D/W15A-N270 Panel PC Emulation Type [Auto] Use the Emulation Type BIOS option to specify the type of emulation BIOS has to provide for the USB device. BIOS auto-detects the current USB. Auto EFAULT The USB device will be emulated as a floppy drive.

  • Page 84: Bios Menu 14: Pci/Pnp Configuration

    AFL-W19A/17D/W15A-N270 Panel PC BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit Advanced PCI/PnP Settings Available: Specified IRQ ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ is available to be use the PCI/PnP devices IRQ3 [Reserved] Reserved: Specified IRQ IRQ4 [Reserved] is reserved for use by...

  • Page 85: Dma Channel# [Available]

    AFL-W19A/17D/W15A-N270 Panel PC IRQ 11 IRQ 14 IRQ 15 DMA Channel# [Available] Use the DMA Channel# option to assign a specific DMA channel to a particular PCI/PnP device. The specified DMA is available to be used by Available EFAULT PCI/PnP devices...

  • Page 86: Boot

    AFL-W19A/17D/W15A-N270 Panel PC 3.5 Boot Use the Boot menu (BIOS Menu 15) to configure system boot options. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit Boot Settings Configure settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ during system boot. > Boot Settings Configuration >...

  • Page 87: Quick Boot [Enabled]

    AFL-W19A/17D/W15A-N270 Panel PC Quick Boot [Enabled] Use the Quick Boot BIOS option to make the computer speed up the boot process. No POST procedures are skipped Disabled Some POST procedures are skipped to decrease Enabled EFAULT the system boot time Quiet Boot [Enabled] Use the Quiet Boot BIOS option to select the screen display when the system boots.

  • Page 88: Boot From Lan Support [Disabled]

    AFL-W19A/17D/W15A-N270 Panel PC Allows the Number Lock on the keyboard to be enabled EFAULT automatically when the computer system boots up. This allows the immediate use of the 10-key numeric keypad located on the right side of the keyboard. To confirm this, the Number Lock LED light on the keyboard is lit.

  • Page 89: Boot Device Priority

    AFL-W19A/17D/W15A-N270 Panel PC 3.5.2 Boot Device Priority Use the Boot Device Priority menu (BIOS Menu 17) to specify the boot sequence from the available devices. The drive sequence also depends on the boot sequence in the individual device section. BIOS SETUP UTILITY...

  • Page 90: Hard Disk Drives

    AFL-W19A/17D/W15A-N270 Panel PC 3.5.3 Hard Disk Drives Use the Hard Disk Drives menu to specify the boot sequence of the available HDDs. Only installed hard drives are shown. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit Hard Disk Drives Specifies the boot ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯...

  • Page 91: Cd/Dvd Drives

    AFL-W19A/17D/W15A-N270 Panel PC 3.5.5 CD/DVD Drives Use the CD/DVD Drives menu to specify the boot sequence of the available CD/DVD drives. When the menu is opened, the CD drives and DVD drives connected to the system are listed as shown below:...

  • Page 92: Security

    AFL-W19A/17D/W15A-N270 Panel PC 3.6 Security Use the Security menu (BIOS Menu 21) to set system and user passwords. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit Security Settings ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Supervisor Password :Not Installed User Password :Not Installed...

  • Page 93: Chipset

    AFL-W19A/17D/W15A-N270 Panel PC 3.7 Chipset Use the Chipset menu (BIOS Menu 22) to access the Northbridge and Southbridge configuration menus WARNING! Setting the wrong values for the Chipset BIOS selections in the Chipset BIOS menu may cause the system to malfunction.

  • Page 94: Northbridge Configuration

    AFL-W19A/17D/W15A-N270 Panel PC 3.7.1 Northbridge Configuration Use the Northbridge Chipset Configuration menu (BIOS Menu 23) to configure the Northbridge chipset. BIOS SETUP UTILITY Main Advanced PCIPNP Boot Security Chipset Power Exit Northbridge Configuration ⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯⎯ Memory Hole [Disabled] Internal Graphics Mode Select...

  • Page 95: Dvmt Mode Select [Dvmt Mode]

    AFL-W19A/17D/W15A-N270 Panel PC Dedicates 1 MB of main memory for graphics Enable, 1 MB Dedicated 8 MB of main memory for graphics Enable, 8 MB EFAULT DVMT Mode Select [DVMT Mode] Use the DVMT Mode Select option to select the Intel Dynamic Video Memory Technology (DVMT) operating mode.

  • Page 96: Southbridge Configuration

    AFL-W19A/17D/W15A-N270 Panel PC LVDS Panel Type Use the Panel Type to determine the LCD panel resolution. Configuration options are listed below: 1024x768 24b 1280x1024 48b 1366x768 24b 1440x900 48b BY HARDWARE EFAULT Current Jumper Setting Shows current value of the hardware jumper setting for the LVDS resolution. This is the value used when "BY HARDWARE"...

  • Page 97: Exit

    AFL-W19A/17D/W15A-N270 Panel PC Audio Controller [Auto] Use the HDA Controller option to enable or disable High Definition audio codec. Auto EFAULT Enabled High Definition audio Azalia Enable AC'97 audio AC'97 Audio Only No audio All disabled 3.8 Exit Use the Exit menu (BIOS Menu 25) to load default BIOS values, optimal failsafe values and to save configuration changes.

  • Page 98: Discard Changes

    AFL-W19A/17D/W15A-N270 Panel PC Discard Changes Use the Discard Changes option to discard the changes and remain in the BIOS configuration setup program. Load Optimal Defaults Use the Load Optimal Defaults option to load the optimal default values for each of the parameters on the Setup menus.

  • Page 99: System Maintenance

    AFL-W19A/17D/W15A-N270 Panel PC Chapter System Maintenance Page 88...

  • Page 100: System Maintenance Introduction

    AFL-W19A/17D/W15A-N270 Panel PC 4.1 System Maintenance Introduction If the components of the AFL-W19A/17D/W15A-N270 fail they must be replaced, such as the wireless LAN module or the motherboard. Please contact the system reseller or vendor to purchase the replacement parts. Back cover removal instructions and jumper settings for the AFL-W19A/17D/W15A-N270 are described below.

  • Page 101: Memory Module Replacement

    AFL-W19A/17D/W15A-N270 Panel PC Figure 4-1: Back Cover Retention Screws 4.4 Memory Module Replacement The flat panel PC has a preinstalled memory module. If the memory module fails, take the steps below to replace it. Remove the back cover. See Section 4.3 above.

  • Page 102: Figure 4-2: Ddr So-Dimm Module Installation

    AFL-W19A/17D/W15A-N270 Panel PC Figure 4-2: DDR SO-DIMM Module Installation Page 91...

  • Page 103: A Safety Precautions

    AFL-W19A/17D/W15A-N270 Panel PC Appendix Safety Precautions Page 92...

  • Page 104: Safety Precautions

    DO NOT strike or exert excessive force onto the LCD panel. DO NOT touch any of the LCD panels with a sharp object DO NOT use the AFL-W19A/17D/W15A-N270 in a site where the ambient temperature exceeds the rated temperature Page 93...

  • Page 105: Anti-Static Precautions

    Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AFL-W19A/17D/W15A-N270. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the AFL-W19A/17D/W15A-N270 is opened and any of the electrical components are handled, the following anti-static precautions are strictly adhered to.

  • Page 106: Product Disposal

    Please follow the national guidelines for electrical and electronic product disposal. A.2 Maintenance and Cleaning Precautions When maintaining or cleaning the AFL-W19A/17D/W15A-N270, please follow the guidelines below. A.2.1 Maintenance and Cleaning Prior to cleaning any part or component of the AFL-W19A/17D/W15A-N270, please read the details below. Page 95...

  • Page 107: Cleaning Tools

    AFL-W19A/17D/W15A-N270 Panel PC Except for the LCD panel, never spray or squirt liquids directly onto any other components. To clean the LCD panel, gently wipe it with a piece of soft dry cloth or a slightly moistened cloth. The interior does not require cleaning. Keep fluids away from the interior.

  • Page 108: B Alc892 Digital Microphone Configuration

    AFL-W19A/17D/W15A-N270 Panel PC Appendix ALC892 Digital Microphone Configuration Page 97...

  • Page 109: Alc892 Digital Microphone Configuration

    AFL-W19A/17D/W15A-N270 Panel PC B.1 ALC892 Digital Microphone Configuration To enable the ALC892 digital microphone function, follow the steps below. Make sure the Realtek ALC892 high definition audio driver has been installed on Step 1: the system. To launch the Realtek ALC892 HD Audio Manager, double click either:...

  • Page 110: Figure B-3: Enabling The Digital Microphone Function

    AFL-W19A/17D/W15A-N270 Panel PC Select Mic Volume in the Record section (Figure B-3). Step 5: The digital microphone function is now enabled. Figure B-3: Enabling the Digital Microphone Function Move the slide bar to adjust the microphone volume (Figure B-4). Step 6:...

  • Page 111: Figure B-5: Mixer Toolbox Screen

    AFL-W19A/17D/W15A-N270 Panel PC Click the Advanced icon (Figure B-5) to display the Advanced setting screen. Step 7: Figure B-5: Mixer ToolBox Screen In the Advanced setting screen (Figure B-6), the user may turn on the Step 8: Microphone Boost function.

  • Page 112: Cbios Options

    AFL-W19A/17D/W15A-N270 Panel PC Appendix BIOS Options Page 101...
  • Page 113 AFL-W19A/17D/W15A-N270 Panel PC Below is a list of BIOS configuration options in the BIOS chapter. 　 System Overview .........................46 　 System Time [xx:xx:xx] .......................47 　 System Date [xx/xx/xx] ......................47 　 ATA/IDE Configuration [Compatible].................49 　 Legacy IDE Channels [SATA Pri, PATA Sec] ..............49 　...
  • Page 114 AFL-W19A/17D/W15A-N270 Panel PC 　 Resume on Keyboard/Mouse [Disabled] ................64 　 Resume on Ring [Disabled] ....................64 　 Resume on PCI-Express WAKE# [Enabled]..............64 　 Resume On RTC Alarm [Disabled]..................64 　 Remote Access [Disabled]....................65 　 Serial Port Number [COM1]....................66 　 Base Address, IRQ [2F8h,3]....................66 　...
  • Page 115 AFL-W19A/17D/W15A-N270 Panel PC 　 DVMT Mode Select [DVMT Mode]..................84 　 DVMT/FIXED Memory [128 MB] ..................84 　 Boot Display Device [Auto]....................84 　 Panel Type ..........................85 　 Current Jumper Setting.......................85 　 Audio Controller [Auto] .......................86 　 Save Changes and Exit .......................86 　...

  • Page 116: D Terminology

    AFL-W19A/17D/W15A-N270 Panel PC Appendix Terminology Page 105...
  • Page 117 AFL-W19A/17D/W15A-N270 Panel PC Audio Codec 97 (AC’97) refers to a codec standard developed by Intel® AC ’97 in 1997. Advanced Configuration and Power Interface (ACPI) is an OS-directed ACPI configuration, power management, and thermal management interface. Advanced Host Controller Interface (AHCI) is a SATA Host controller AHCI register-level interface.
  • Page 118 AFL-W19A/17D/W15A-N270 Panel PC Direct Memory Access (DMA) enables some peripheral devices to bypass the system processor and communicate directly with the system memory. Dual Inline Memory Modules are a type of RAM that offer a 64-bit data DIMM bus and have separate electrical contacts on each side of the module.
  • Page 119 AFL-W19A/17D/W15A-N270 Panel PC Liquid crystal display (LCD) is a flat, low-power display device that consists of two polarizing plates with a liquid crystal panel in between. Low-voltage differential signaling (LVDS) is a dual-wire, high-speed LVDS differential electrical signaling system commonly used to connect LCD displays to a computer.

  • Page 120: E Watchdog Timer

    AFL-W19A/17D/W15A-N270 Panel PC Appendix Watchdog Timer Page 109...
  • Page 121 AFL-W19A/17D/W15A-N270 Panel PC NOTE: The following discussion applies to DOS environment. IEI support is contacted or the IEI website visited for specific drivers for more sophisticated operating systems, e.g., Windows and Linux. The Watchdog Timer is provided to ensure that standalone systems can always recover from catastrophic conditions that cause the CPU to crash.

  • Page 122: Example Program

    AFL-W19A/17D/W15A-N270 Panel PC NOTE: When exiting a program it is necessary to disable the Watchdog Timer, otherwise the system resets. Example program: ; INITIAL TIMER PERIOD COUNTER W_LOOP: AX, 6F02H ;setting the time-out value BL, 30 ;time-out value is 48 seconds ;...
  • Page 123 AFL-W19A/17D/W15A-N270 Panel PC Appendix Hazardous Materials Disclosure Page 112...
  • Page 124 AFL-W19A/17D/W15A-N270 Panel PC F.1 Hazardous Materials Disclosure Table for IPB Products Certified as RoHS Compliant Under 2002/95/EC Without Mercury The details provided in this appendix are to ensure that the product is compliant with the Peoples Republic of China (China) RoHS standards. The table below acknowledges the presences of small quantities of certain materials in the product, and is applicable to China RoHS only.
  • Page 125 AFL-W19A/17D/W15A-N270 Panel PC Part Name Toxic or Hazardous Substances and Elements Lead Mercury Cadmium Hexavalent Polybrominated Polybrominated (Pb) (Hg) (Cd) Chromium Biphenyls Diphenyl Ethers (CR(VI)) (PBB) (PBDE) Housing Display Printed Circuit Board Metal Fasteners Cable Assembly Fan Assembly Power Supply...
  • Page 126 AFL-W19A/17D/W15A-N270 Panel PC 此附件旨在确保本产品符合中国 RoHS 标准。以下表格标示此产品中某有毒物质的含量符 合中国 RoHS 标准规定的限量要求。 本产品上会附有”环境友好使用期限”的标签，此期限是估算这些物质”不会有泄漏或突变”的 年限。本产品可能包含有较短的环境友好使用期限的可替换元件，像是电池或灯管，这些元 件将会单独标示出来。 部件名称 有毒有害物质或元素 铅 汞 镉 六价铬 多溴联苯 多溴二苯醚 (Pb) (Hg) (Cd) (CR(VI)) (PBB) (PBDE) 壳体 显示 印刷电路板 金属螺帽 电缆组装 风扇组装 电力供应组装 电池 O: 表示该有毒有害物质在该部件所有物质材料中的含量均在 SJ/T11363-2006 标准规定的限量要求以下。 X: 表示该有毒有害物质至少在该部件的某一均质材料中的含量超出 SJ/T11363-2006 标准规定的限量要求。...

This manual is also suitable for:

Afl-w17dAfl-w15a-n270Afl-w19a-n270Afl-w17d-n270

Table of Contents