Blaupunkt SA 2500 Kit User Manual page 4

Device Location Panning:
PIR Sensor

Mount the PIR sensor at 1.9-2m height for best
performance. When mounted at 2m height, the PIR
sensor has a range of 12m.

PIR sensor detection is most effective when the
intruder is moving across its field of view. Do not
mount PIR sensor in a location that faces intruder
directly

Do not mount the PIR sensor to look at
door/window protect by Door Contact, as the signal
transmitted simutaneously from PIR and Door
Contact could cancel each other.

Do not mount the PIR sensor directly exposed to
sunlight,

Do not point PIR sensor at window, or sources of
heat e.g. fire or boiler.
Control Panel

The Control Panel should be mounted in
a hidden area and invisible, however still
accessible.

The Control Panel should be mounted at
a location with good GSM strength to
send report and receive command.
2
Door Contact

The Door Contact should be
mounted as high as possible.

Do not aim a PIR sensor at this
door/window.
Remote Controller

It is used inside or outside your
home and can be kept on the
keyring