Advertisement
-
Jamming function: Signal interference
detection feature. When RF signal jamming
interference is detected for a continuous 30
seconds, the alarm will be activated. This
feature is Disabled as a factory default.
-
High Temperature alarm: When the
temperature exceeds this threshold by 1°C,
a SMS report will be sent to programmed
telephone number. When the temperature
drops to 3°C below the threshold, a SMS
report will be sent to the programmed
telephone number(s) to notify the recipient
of High Temperature Restoration.
-
Low Temperature alarm: When the
temperature drops below this threshold by
1 ° C, a SMS report will be sent to
programmed telephone number. When the
temperature returns to 3 ° C above the
threshold, a SMS report will be sent to the
programmed telephone number(s) to notify
the
recipient
Restoration.
NOTE:
You must first learn in an optional
temperature sensor to use the
temperature report function. You can
also choose to enable or disable the
reporting function. If reporting is
disabled, the system will not send out
a report.
Select the option you wish to edit.
When you are satisfied with all of your alarm
settings, press "Save". The phone will send
a SMS command to panel.
You can press the "Menu" button on your
Android phone to bring up the "Sync"
options and choose to sync either the
configurations or high/low temperature
setting.
Reporting Setting
of
Low
Temperature
The Report Setting Menu allows you to edit your
telephone numbers for reporting.
The SA2500 Kit can program up to 6 telephone
numbers for status or alarm reporting.
The telephone numbers can either be voice
reporting or SMS reporting.
Voice reporting: The control panel will dial
the number assigned to voice reporting to
report an alarm.
SMS reporting: The control panel will send
a SMS message to the number assigned to
SMS reporting.
SMS reporting are separated into three types:
Alarm, Status, All.
-
Alarm: if there is an alarm event, the control
panel will send the alarm information to the
programmed phone number.
-
Status: If there is a status change (from Arm
to Home Arm, etc.), the control panel will
send the status change information to the
programmed phone number.
-
All: The control panel will send report to the
programmed phone number for both alarm
and status report.
Select the top column to select the reporting
priority you want to edit.
26
Advertisement
