Advertisement
Door Contact
The Door Contact has 2 knockouts on the inside of the back cover where plastic is thinner for wall
mounting.
1. The Door Contact should be mounted on the door/window frame, while the magnet should be
mounted on the door/window as shown in the picture below. The gap between the Door Contact
and the magnet should be no more than 15 mm.
2. Drill holes into the wall using the knockouts as template, then fix the Door Contact base onto the
wall with the screws and plugs provided. Alternatively, you can also use the double side adhesive
tape provided to glue the Door Contact on the frame.
3. Replace the Door Contact cover onto the base.
Frame
Door/
Window
9
Advertisement
