Advertisement
Connect2Home for iPhone
The
iPhone
version
Application
supports
functions except SMS commands which inquire
Control Panel for information. This is due to the
limit of iOS system, which prohibits incoming
SMS message from accessing application data..
An iOS version of 6.1 or higher is required to
use Connect2Home Application on iPhone.
Select the Connect2Home icon to start the
application.
Add New Panel
Upon starting the application, you will first enter
Panel Selection menu
For first time user, you need to first enter
your panel information, please select the "+"
icon.
Enter the panel information, including the
of
Connect2Home
all
SMS
command
panel name you want to use in the
application, panel SIM card phonenumber,
a User PIN Code and the SMS keyword
used to access the panel. Press "Done" to
confirm when finished.
You will return to Panel Selection menu, the
new panel you entered will be displayed
NOTE:
The PIN Code and SMS Keyword
entered in Panel Information are
included in every SMS command sent
with the app for the Control Panel to
verify the SMS command.
The default SMS Keyword is PROG.
The PIN code must be identical to a
User PIN Code in the panel. The
factory default PIN code in the Control
panel is "1234" for User PIN Code 1.
You can change both SMS Keyword
and PIN code later by editing panel
information.
12
Advertisement
