Advertisement
Press the "Menu" button on your Android
phone to bring up the "Sync" function. Press
"Sync" to send a SMS command to the
Control Panel for inquiring current User PIN
code setting. Once your phone receives the
SMS response message from the Control
Panel, Connect2Home app will update the
User PIN code information.
Alarm Setting
The Alarm Setting Menu allows you to edit
alarm related configuration.
Please refer to below for the configurable
settings.
-
Exit time: Time period given after initiating
the arming process. During this time, no
sensors will trigger the alarm and you can
exit the premises before the system enters
arm mode. Default exit time is 30 seconds.
-
Exit sound: Exit time countdown beep
volume. Default exit sound is Low.
-
Entry time: Time period given after
triggering a device set with Entry attribute.
During this time, the system will need to be
disarmed, or the alarm will be activated.
Default Entry time is 20 seconds.
-
Entry sound: Entry time countdown beep
sound. Default entry sound is Low.
-
Alarm length: The time for the alarm to be
activated for. Default alarm length is 3
minutes (180 seconds).
-
Door Chime Volume: The Door Chime
sound activated by the Control Panel when
a device set with entry attribute is triggered
under Disarm mode. Default is Disabled.
25
Advertisement
