Table of Contents
Advertisement
Advanced Menu → Disk Maintenance → Delete Disk
o
To begin deleting the disk, use the Jog to select DELETE DISK, then
press the Enter button. The Deleting Disk menu will appear. The unit
will begin deleting the oldest recorded information immediately.
To stop the delete process, select [CANCEL] by pressing the Enter
button.
Data that was deleted before [CANCEL] was selected will remain deleted
unless UNDELETE DISK is selected.
Advanced Menu → Disk Maintenance → Undelete Disk
o
To restore information that was previously deleted, use the Jog to select
UNDELETE DISK, then press the Enter button.
To stop the restore process, select [CANCEL] by pressing the Enter
button.
Advanced Menu → Disk Maintenance → Erase Disk (Permanent)
o
Caution: Erasing the disk removes recorded data without the
possibility of restoring it.
To begin erasing the disk, use the Jog to select ERASE DISK
(PERMANENT), then press the Enter button.
To stop the erasing process, select [CANCEL] by pressing the Enter
button.
Data that was erased before [CANCEL] was selected will remain deleted
permanently.
Advanced Menu →Audio Record Setting
5.3
Use this menu to:
•
Enable or Disable the audio recording capability of the DSR.
Audio Limitations: To record audio at least one the unit's video inputs must be set to record video at
a rate of 1pps or faster.
Advanced Menu → Auto Delete Mode
5.4
Configuring the unit with the Auto Delete mode from 7 to 99 days prevents the unit from displaying or
archiving any data that is more than the selected number of days old. This feature may be required by
law in some jurisdictions, please consult with the local authorities.
Use the Jog to select from 7-99 Days or OFF.
Press the Enter button to implement the selection.
If the selection is altered from what was previously selected, the confirmation menu will appear.
Rotate the Shuttle to select Yes or NO.
Deleting Disk...
[CANCEL]
Undeleting Disk...
[CANCEL]
Erasing Disk...
[CANCEL]
OFF
ON
Advertisement
Table of Contents
