Main Menu → Alarms - GE DSR-2000e User Manual

Main Menu → Alarms
4.2
Use this menu to specify:
•
Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
•
Whether a teletext alarm signal (generated by a
multiplexer or other device) will cause the unit to
activate an alarm condition.
•
Whether the internal buzzer is activated during an
alarm condition.
A feature unique to the DSR is its ability to detect alarms via teletext provided within the video signal.
Standard Time Lapse VCRs can only detect an alarm if the alarm output signal of the Mux is wired
directly to the alarm input of the VCR using the VEXT connection.
The teletext alarm detecting feature of the DSR is compatible with the following styles of Multiplexers:
•
Kalatel
•
Philips
•
Robot
•
Pelco
•
Sanyo
•
Navco
•
ATV
•
ATV QSP
•
QSI
•
Diebold
•
Panasonic
•
Videoart
•
Tectron DRAX
Connecting to Dedicated Micros (DM)
When connecting to a Dedicated Micros multiplexer:
•
It is necessary to connect the alarm output of the Mux to the alarm input of the DSR (as you
would do when connecting the alarm input on standard time-lapse VCR).
• It is necessary to configure the Main Menu → Alarms → Hardwire Alarm as Enabled.
• It is necessary to configure the Main Menu → Alarms → Teletext Alarm as Disable.
To configure the alarm settings:
1. Use the Shuttle to navigate among the fields.
2. Use the Jog to change the values of the highlighted
fields.
3. To Save the changes and Exit the menu: Use the
Jog to select [OK], then press the Enter button.
4. To Exit the menu without making changes: Use the
Jog to select [CANCEL], then press the Enter button.
--OR--
Alarm Settings
Hardwire Alarm :
Teletext Alarm :
Alarm Buzzer :
[CANCEL] [OK]
Alarm Settings
Hardwire Alarm :
Teletext Alarm :
Alarm Buzzer :
[CANCEL] [OK]
Enable
Disable
Enable
Enable
Disable
Enable