Table of Contents
Advertisement
Main Menu → Display Settings → Playback Time / Date
o
To display the time and date the recording was made (during playback) select On. The data is
displayed near the upper right hand corner of the screen.
Use the Jog to select On or Off.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu → Archive Setup
4.6
Use this menu to:
•
Select data to be archived and begin archiving process.
•
Restore data from archive device.
•
Enable background archiving.
•
Enable or Disable QuickWave Setup.
•
Specify how the unit will handle overwrite issues when the
archive medium becomes full.
•
Erase the archived data.
Main Menu → Archive Setup → Selective Archive
o
The Selective Archive feature allows the user to archive recorded data from the hard disk onto a CD,
DAT, AIT, RAID, or DVSe. See the Archiving Addendum for details about using archive devices.
The Archive Search Filters menu allows the user to search the hard disk for recorded events, such as
an alarm condition, or a previous recording session, then select events to be archived for later viewing.
For example, each time Record mode is activated, it is considered a separate recording session.
Use this menu to specify:
•
The Start and Stop date of
the search.
•
The Start and Stop time of
the search.
•
Which cameras to search
exclusively.
•
To search for recorded
alarms.
This menu also provides information on
the status of the archive device.
--OR—
Archive Search Filters
TARGET: Not Ready
Start
DATE: 12/25/00
(MM/DD/YY)
Start
TIME: 11:11:21
1
2
3
CAMERA: [ ][ ][ ][ ][ ][ ][ ][ ]
ALARM: [ ]
[CANCEL]
Selective archive
Restore from archive
Background archive
Quickwave Setup
Archive Overwrite Mode
Erase Archive Medium
Stop
[ ]
01/01/01
(MM/DD/YY)
Stop
[ ]
12:34:34
4
5
6
7
8
[START SEARCH]
OFF
ON
[ ]
[ ]
Advertisement
Table of Contents
