Main Menu → Time/Date → Set Date Format
q
Rotate the Jog to set the desired date format. Select from either:
•
MM/DD/YY
•
DD/MM/YY
•
YY/MM/DD
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu → Time/Date → Time / Date Display
q
Use this menu to specify if the time and date will be displayed on:
•
Monitor-A.
•
Monitor-B.
•
Both Monitors.
•
Not Displayed
Rotate the Jog to navigate, then rotate the Shuttle to change the values.
Save changes and exit the menu: Select [OK], then press the Enter button.
Exit the menu without making changes: Press the Menu button, or select [CANCEL], then press
the Enter button.
3.9 Record
Use this menu to:
•
Specify a schedule for recording.
•
Specify if a camera is to be used for event recording,
time-lapse recording, or both.
•
Specify the record quality: High, Medium, or Standard.
•
Specify the time-lapse record rate.
•
Specify the event record rate.
•
Specify the activity record rate.
•
Specify the global alarm record rate.
•
Specify the Alarm/Event actions.
•
Perform disk maintenance by Deleting, Un-deleting, or
Destroying previously recorded video.
•
Turn the Record Lock feature ON or OFF.
•
Turn the ADM (Automatic Delete Mode) ON or OFF.
0150-0198B
28
Date Format Setup
Select Format
MM/DD/YY
Time/Date Display
Monitor A :
Monitor B : ON
[CANCEL]
[OK]
Record Timer
Event/Timelapse
Record Settings
Alarm/Event Actions
Disk Maintenance
Record Lock
ADM
e
Calibur DVMR
Triplex eZ
ON