Table of Contents
Advertisement
Play Forward
To begin normal playback, press the Play Forward button. The unit will begin
playing back data from the beginning of the last recording session.
Playback is indicated:
•
As PLAY near the upper left hand corner of the primary monitor, for
three seconds.
•
As PLAY> on the LCD.
Reverse Play
To begin reverse playback, press the Reverse play button. The unit will begin
playing back data from the beginning of the last recording session.
Reverse playback is indicated:
•
As REVERSE PLAY near the upper left hand corner of the primary
monitor, for three seconds.
•
As PLAY< on the LCD.
If there is only one recording session on the hard disk, the unit will indicate START
OF DATA on the primary monitor.
Playback Speed
The unit will playback the data at the rate it was recorded. The user can alter the
playback speed using the Up/Down Record Speed buttons.
Altering the playback speed overrides any change in playback speed that would
occur due to an alarm condition in the playback. To clear the override, press the
Stop button, then press the Play button to resume playback at the speed the data
was recorded.
The playback speed is indicated on the LCD in Pictures Per Second.
Fast Forward
During playback, rotate the Shuttle clockwise to view the data at a Higher than
normal rate. Increasing the amount of rotation increases the rate of playback.
Fast Forward is indicated:
•
As FAST FORWARD near the upper left hand corner of the primary
monitor, for three seconds.
•
As FFWD on the LCD.
Rewind
During playback, rotate the Shuttle counter-clockwise to view the data (in
reverse) at a Higher than normal rate. Increasing the amount of rotation increases
the rate of playback.
Rewind is indicated:
•
As REWIND near the upper left hand corner of the primary monitor, for
three seconds.
•
As REW on the LCD.
PLAY
Play Forward
button
REVERSE PLAY
Reverse play
button
REC/PLAY
SPEED
Record Speed
buttons
REW
FF
Jog / Shuttle
REW
FF
Jog / Shuttle
Advertisement
Table of Contents
