Table of Contents
Advertisement
Entering the Main menu
Enter the Main menu by pressing the Menu button. The Main menu will
appear on the primary monitor.
The Main Menu
The Main menu provides access to all of the operator programmable
options. Each sub-section of the Main menu is described briefly in this
section.
For complete information about operator programming in the Main menu,
see section 4.
Main Menu → Time/Date
o
Use this menu to specify:
•
The time format: 12 or 24 hours.
•
The date format: MM/DD/YY, DD/MM/YY, or
YY/MM/DD.
•
The time.
•
The date.
•
Set the Region for the Auto Daylight Savings Time
feature.
•
Setup clock synchronization between the DSR and
the Network Server.
Main Menu → Alarms
o
Use this menu to specify:
•
Whether an alarm condition will be activated when the
unit detects a signal on the Alarm In connection.
•
Whether a teletext alarm signal (generated by a
multiplexer or other device) will cause the unit to
activate an alarm condition.
•
Whether the internal buzzer is activated during an
alarm condition.
MENU
Menu button
Time/Date
Alarms
Timer Settings
Record Settings
Display Settings
Archive Setup
Advanced Menu
About
Set Time Format
Set Date Format
Set Time
Set Date
Set Region
Set Network Time Protocol
Alarm Settings
Hardwire Alarm :
Teletext Alarm :
Alarm Buzzer
:
[CANCEL]
[OK]
ENTER
Enable
Disable
Enable
Advertisement
Table of Contents
