Table of Contents
Advertisement
Searching for Recorded Alarms
1. Using the Shuttle to navigate, highlight the ALARM parameter, then press the Enter button. The
unit will enter Edit mode.
2. Use the Jog to activate the alarms search, by placing an [X] in the check box.
3. Press the Enter button at any time to exit Edit mode.
Starting the Search
Using the Shuttle to navigate, highlight the [START SEARCH] parameter, then press the Enter
button. The Restore Search Results menu will appear. Please note that restoring data indicated in
this menu is not currently supported on the DSR unit.
Press the Menu button to exit the menu.
000
001
"ENTER" to play
Main Menu → Archive Setup → Background Archive
o
With the Background Archiving Feature turned ON, the unit archives recorded data
automatically. Data is recorded to both the hard disk and the archiving device simultaneously.
The unit cannot Background Archive when the unit is recording at its highest record speed.
Use the Jog to select ON of OFF.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making any changes.
Restore Search Results
Start Date
Start Time
11/29/2000
11/29/2000
Available on Target Medium [
--OR—
Size (MB)
10:00:04
279
10:03:25
67
Selected [
"SEARCH" to restore
[x]
[x]
383 ](MB)
652 ](MB)
OFF
ON
Advertisement
Table of Contents
