GE DSR-2000e User Manual page 35

Caution: Do not connect both video inputs at the same time.
Main Menu → Record Settings → Color/Mono
o
This menu sets the recorded video to be in Color or Mono. If you select auto, (default), the
unit will auto detect color as before. If you select mono, it will force the recording into
monochrome. All recorded and looped video will be monochrome. Use the Jog to select
Auto or Mono.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu → Record Settings → Normal Record Speed
o
Use the Jog to select the desired Normal Record Speed.
Normal Record Speeds:
NTSC: 60, 30, 20, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1, 0.0.
PAL: 50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1, 0.0.
When the Normal Record Speed is set to 0.0, the unit will only record
while an alarm is active.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
Main Menu → Record Settings → Alarm Record Speed
o
Use the Jog to select the desired Alarm Record Speed.
Alarm Record Speeds:
NTSC: 60, 30, 20, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1.
PAL: 50, 25, 17, 10, 5, 3, 2, 1, 0.5, 0.2, 0.1.
Press the Enter button to confirm the selection and exit the menu.
Press the Menu button to exit the menu without making changes.
--OR—
--OR—
--OR—
Auto
Mono
Normal Record Speed
Pictures Per Second
5p
Alarm Record Speed
Pictures Per Second
60p