Main Menu → Timer Settings
o
This menu allows the user to
program a timed-recorded
event. Use this menu to
specify:
•
The date, or days on
which the recording
will occur.
•
The start and stop
time.
•
The record speed.
•
The record quality.
•
Whether the event is
enabled.
Main Menu → Record Settings
o
Use this menu to specify:
•
Which video input on the back panel is activated.
•
Color or Monochrome recording.
•
The record speed during Normal recording.
•
The record speed when the unit detects an alarm condition.
•
The recorded picture quality.
Main Menu → Display Settings
o
Use this menu to specify what status information will be displayed on
the primary monitor. Select On or Off, for the following items.
•
The current time and date.
•
The remaining amount of time before the hard disk runs
out of record space.
•
The Archive Status.
•
The time and date of the last alarm.
•
The Record or Playback Speed.
•
During Playback, the time and date the recording was
made.
DAY
START
31
16:45
SAT
07:55
MON-FRI
09:56
SAT-SUN
14:23
MON-SUN
02:23
--
--:--
EDIT Mode
STOP
SPD(pps)
17:05
20
08:10
10
11:05
60
14:50
60
03:34
20
--:--
--
[OK]
Hit "ENTER" To Toggle EDIT Mode
Video Input
Color/Mono
Normal Record Speed
Alarm Record Speed
Video Quality
Current Time / Date
Record Capacity
Archive Status
Last Alarm
Record Playback Speed
Playback Time / Date
QUALITY
ON/OFF
High
On
Med
Off
Low
On
High
On
Med
Off
--
--