Table of Contents
Advertisement
3.9 Record
Use this menu to:
•
Specify if a camera is to be used for event recording,
time-lapse recording, or both.
•
Specify the record quality: High, Medium, or Standard.
•
Specify the time-lapse record rate.
•
Specify the event record rate.
•
Specify the activity record rate.
•
Specify the global alarm record rate.
•
Specify the Alarm/Event actions.
•
Perform disk maintenance by Deleting, Un-deleting, or
Destroying previously recorded video.
•
Turn the Record Lock feature ON or OFF.
Main Menu → Record → Event /Timelapse
q
Use this menu to specify how each camera will record during normal
and event conditions.
TL: Records at the Time-lapse Record Rate under normal conditions.
Does not change record rate during an event.
Event: Records during events at the Event Record Rate. Camera
does not record under normal conditions.
Event + TL: Records at the Time-lapse Record Rate under normal
conditions. Records at the Event Record Rate during events.
This is the default setting.
About Events: An Event is an action that the unit acknowledges by recording at the Event
NOTE
Record Rate, yet it is not cause for an Alarm. Events are created by Activity detection.
Example of an Event: A camera is pointed at the front door inside the lobby during
business hours. With the Event Camera Settings Type set to Event, the unit does not record
while the doorway is empty. When activity motion detection senses that someone is entering
or leaving the doorway, the unit begins recording at the Event Record Rate and stops
recording when the motion ceases.
Activity Detection Event: See Setup Parameters in section 3.11 for detailed information
about configuring activity detection as an event in the menu system.
0150-0257A
Event/Timelapse
Record Settings
Alarm/Event Actions
Disk Maintenance
Record Lock
25
Event Camera Settings
Camera 01:
Event + TL
Camera 02: TL
Camera 03: Event
Camera 04: TL
[CANCEL]
[OK]
Kalatel DVMRe-4L
Advertisement
Table of Contents
