Printing The Print Settings List; Using The Network Setup Submenu - Lexmark 9300 Series User Manual

Use this
Photo Size
Layout
Quality
Paper Handling

Printing the Print Settings List

1 From the Setup menu, press
2
Press .
3
Press to print a user default settings list which lists the setting in the printer, the value it is set to, and its factory
default.

Using the Network Setup submenu

The Network Setup submenu is listed only if an internal print server is installed.
1
From the Setup menu, press
2
Press .
3
After changing values, press
Use this
Print Network Setup Page
Wireless Menu
TCP/IP
Network Time Menu
To
Specify the size of the photo to be printed. Values are
Hagaki, L, 2L, 60 x 80 mm, A6, 10 x 15 cm, A5, B5, A4,
13 x18 cm, 3.5 x 5 in., 4 x 6 in., 5 x 7 in., 8 x 10 in., or
8.5 x 11 in..
Note: Automatic is also in the list, but it is not selectable.
The value changes to automatic based on the value
chosen for Layout.
Specify a layout for the photos. Values are Automatic,
Borderless (1 Per Page), One Photo Centered, or 1 Per
Page through 16 Per Page.
Specify to print in Auto, Draft, Normal, or Photo mode.
Note: Auto and Photo are good for pictures and
paper-based print jobs. Auto is good for printing on
transparencies.
Change settings related to the loading of paper in the
paper tray or trays. For more information, see "Using the
Paper Handling submenu" on page 54.
repeatedly until Print Settings List is highlighted.
or
or repeatedly until Network Setup is highlighted.
to save these values and exit this submenu.
To
Print a list of network functions. Press
Press
information, see "Wireless Setup Menu" on page 61.
Sets the network option to TCP/IP (Transmission Control
Protocol/Internet Protocol). Press
IP Menu. For more information, see "TCP/IP Menu" on
page 61.
Set Time Server to either the Enable or Disable value.
1
2
60
to access the Wireless Setup Menu. For more
Press to access the Network Time Menu.
Press to save and exit.
to print the list.
to access the TCP/