Connecting To A Telephone - Lexmark 9300 Series User Manual

3
Connect the other end of the telephone cord into the N slot of an active telephone wall jack.
4
If you would like to use the same line for both fax and telephone communication, connect a second telephone line
(not provided) between the telephone and the F slot of an active telephone wall jack.
5
If you would like to use the same line for recording messages on your answering machine, connect a second
telephone line (not provided) between the answering machine and the other N slot of the telephone wall jack.

Connecting to a telephone

Connect a telephone to the printer to use the fax line as a normal telephone line. Then set up the printer wherever your
telephone is located to make copies or to send and receive faxes without using a computer.
Note: Setup steps may vary depending on your country or region. For more information on connecting the printer to
telecommunications equipment, see "Using an RJ11 adapter" on page 19.
1
Make sure you have the following:
• A telephone
• Two telephone cords
• A telephone wall jack
23