Cleaning The Scanner Glass; Ordering Supplies; Removing The Printer From The Tray 2 Base - Lexmark 9300 Series User Manual

Cleaning the scanner glass

1
Dampen a clean, lint-free cloth with water.
2 Gently wipe the scanner glass clean.
Note: Make sure all ink or corrective fluid on a document is dry before placing the document on the scanner glass.

Ordering supplies

To order supplies or to locate a dealer near you, visit our Web site at www.lexmark.com.
Notes:
•
For best results, use only Lexmark print cartridges.
•
For best results when printing photos or other high-quality images, use Lexmark PerfectFinish Photo Paper or
Lexmark Photo Paper. Do not use Lexmark Premium Photo Paper. Your print cartridges are not compatible with
this type of paper.
Item
Black cartridge
Color cartridge
Photo cartridge
USB cable
Optional second paper tray (Tray 2)
Paper
Lexmark PerfectFinish Photo Paper
Lexmark Photo Paper

Removing the printer from the Tray 2 base

If you need to move the printer to a different location, be sure you first remove the printer from the Tray 2 base. This
helps to avoid damaging the printer and the base.
To safely move the printer and the optional Tray 2, follow these precautions:
•
Keep the printer in an upright position.
•
Avoid severe jarring movements that may cause damage to the printer and the tray.
1
Turn the printer off, and disconnect the power cord from the wall outlet.
2
Disconnect all cables from the back of the printer.
3
Remove any paper from Tray 1 and the paper exit tray.
4
Grasp the printer on both sides using the handholds.
Number
44
43
40
1021294
30B0199
Paper size
•
Letter
•
A4
•
4 x 6 in.
•
L
•
4 x 6 in.
• 10 x 15 cm
•
Letter
• A4
147