Printing; Printing A Document; Printing Multiple Copies Of A Document - Lexmark 9300 Series User Manual

Printing

Printing a document

1
Load paper.
With a document open, click File ª Print.
2
3
Click Properties, Preferences, Options, or Setup.
4
Adjust the settings.
5 Click OK.
6
Click OK or Print.

Printing multiple copies of a document

You can print multiple copies of:
•
a hard copy document which you place in the Automatic Document Feeder (ADF) or on the scanner glass
•
a soft copy document contained in a file on your personal computer
To print multiple copies of a hard copy document:
1
Load paper.
2
Load an original document faceup into the Automatic Document Feeder (ADF) or load the first page of a document
facedown on the scanner glass.
3
From the control panel, press
4
Press .
The Copy Mode menu appears.
5 repeatedly until you reach the Copies menu item.
Press or
6
Press or repeatedly until the number of copies you want to print appears.
Note: You can press
it is best to collate the printed pages, so continue with the following steps.
7 repeatedly until you reach the Collate menu item.
Press or
8 until On appears.
Press or
9
Press .
Note: If you are using the scanner glass, a message appears prompting you for additional pages.
To print multiple copies of a soft copy document:
1
Load paper.
With a document open, click File ª Print.
2
3
Click Properties, Preferences, Options, or Setup.
4
From the Print Setup tab, select the number of copies to print.
5 If your document contains more than one page, select the Collate Copies check box.
repeatedly until Copy is highlighted.
or
at this point to start the copy job; however, if your document contains more than one page,
89