Viewing A Slideshow On The Control Panel Display; Printing All Photos; Printing Photos From A Digital Camera Using Dpof - Lexmark 9300 Series User Manual

Menu item:
Remove Red Eye
12
Press .

Viewing a slideshow on the control panel display

1
Insert a memory card or flash drive.
The message Memory Card Detected appears briefly on the display.
2
From the main menu, press
The Photo Card Mode menu appears with View Slideshow highlighted.
3
Press .
4
Press or repeatedly until the speed you want for the slideshow is highlighted.
5 Press .

Printing all photos

1
Load photo paper in Tray 1.
Note: Make sure to load the paper with the glossy or printable side facing down. (If you are not sure which side is
the printable side, see the instructions that came with the paper.)
2
Insert a memory card or flash drive.
The message Memory Card Detected or Storage Device Detected appears briefly on the display.
3 From the main menu, make sure Photo is highlighted, and then press
The Photo Card Mode menu appears with View Slideshow highlighted.
4
Press or repeatedly until Print All Photos is highlighted.
5
Press .
6
Press or repeatedly until the number of photos you want to print on a page is highlighted.
7
Press .
8
Press .

Printing photos from a digital camera using DPOF

Digital Print Order Format (DPOF) is a feature available on some digital cameras. If your camera supports DPOF, you
can specify which photos to print, how many of each, and print settings while the memory card is still in the camera.
The printer recognizes these settings when you insert the memory card into the printer.
.
103
To select an option:
a Press or to choose Yes or No.
b
Press .
.