Do you want to connect the printer to a wireless network? Use the Wireless Setup and Connection. START HERE If you answer “yes” Do you want to connect the printer to any of these directly to the computer? questions, turn to the section indicated Use the USB Setup and...
Page 2
Wireless Setup and Connection You need the following items to complete Wireless Network Setup: Power cord Telephone cord Installation CD Print cartridges Move the printer near the Load paper. computer.
Page 3
Adjust the paper exit Connect the telephone cord and power cord. tray. Adjust the settings. Press to select the Use the keypad to enter the time, and language. to scroll between hours and minutes. Press to locate the Country setting. Press to scroll to AM, PM, or 24Hr, and use...
Page 4
Insert the print cartridges. The printer automatically aligns Make sure the From the Applications the print cartridges and prints an computer is on. folder, double-click the alignment page. This may take a Internet Connect few minutes. icon.
Page 5
From the toolbar, click From the Network pop- Open the Safari browser. the AirPort icon. up menu, select print server. From the Bookmarks drop-down Under Collections, select Bonjour or Rendezvous, menu, select Show All and then double-click 9300 Series. Bookmarks.
Page 6
Click Configuration. Click Wireless. Enter the name of your network (SSID). For BSS Type, select Infrastructure if you are using a wireless router. Select the type of security you use to protect your wireless network. Infrastructure Note: If you do not know this information, see the documentation that came with the wireless network or contact the person who set up your wireless network.
Page 7
From the Network pop- Insert the CD. Double-click the 9300 up menu, select your Series Installer icon on original network. the desktop. Note: You may need to enter the password for your wireless network security. Double-click the Install Click Continue. Follow the instructions on icon.
Setup troubleshooting Networking troubleshooting Incorrect language 1 Press to turn the printer off. Printer is unable to join Make sure the printer settings match those used by the appears on the display. the network wireless network. 2 Press once, and then immediately press and hold Make sure the printer is within range of the wireless 3 Release the buttons.
USB Setup and Connection You need the following items to Move the printer near the complete USB Setup: computer. Power cord USB cable (purchased separately) Print cartridges Telephone cord Installation CD Load paper.
Page 10
Connect the telephone cord and power cord. Important! not connect the USB cable yet. Adjust the settings. Press to select the Use the keypad to enter the time, and language. to scroll between hours and minutes. Press to locate the Country setting.
Page 11
Insert the print cartridges. The printer automatically aligns Make sure the computer is on, and then connect the the print cartridges and prints an USB cable to the printer and to the computer. alignment page. This may take a few minutes.
Page 12
Insert the CD. Double-click the 9300 Double-click the Install Series Installer icon on icon. the desktop. Click Continue. Follow the instructions on the screen to complete installation.
Page 13
Setup troubleshooting Incorrect language 1 Press to turn the printer off. appears on the display. 2 Press once, and then immediately press and hold 3 Release the buttons. 4 Press repeatedly until the language you want appears on the display. 5 Press repeatedly until the option for Country is highlighted.
Wired Setup and Connection You need the following items to Move the printer near the complete Wired Network Setup: router. Power cord Network cable (not included) Print cartridges Telephone cord Installation CD Load paper.
Page 15
Connect the telephone cord and power cord. Important! not connect the Network cable yet. Adjust the settings. Press to select the Use the keypad to enter the time, and language. to scroll between hours and minutes. Press to locate the Country setting.
Page 16
Insert the print cartridges. The printer automatically aligns Make sure the computer is on, and then connect the the print cartridges and prints an network cable to the printer and to the router. alignment page. This may take a few minutes.
Page 17
Insert the CD. Double-click the 9300 Double-click the Install Series Installer icon on icon. the desktop. Click Continue. Follow the instructions on the screen to complete installation.
Page 18
Setup troubleshooting Networking troubleshooting Incorrect language 1 Press to turn the printer off. The printer does not Make sure the printer has power and the light is on. appears on the display. appear in the list of For more information see “Power button is not lit” in the 2 Press once, and then immediately press and hold printers found on your...
Need help?
Do you have a question about the 9350 - X Wireless Office Color Inkjet and is the answer not in the manual?
Questions and answers