Cannot Print From A Bluetooth-Enabled Device; Copy Troubleshooting - Lexmark 9300 Series User Manual

Cannot print from a Bluetooth-enabled device

Make sure that the Bluetooth mode and the Bluetooth
Discovery mode are enabled on your printer
Make sure you type in the correct pass key
Make sure that the external Bluetooth-enabled device is
configured to communicate with the Bluetooth adapter
connected to your printer

Copy troubleshooting

•
"Copier does not respond" on page 159
•
"Scanner unit does not close" on page 159
•
"Poor copy quality" on page 159
•
"Partial document or photo copies" on page 160
1
From the control panel, press
until Setup is highlighted.
2
Press .
3 Press or repeatedly until Change
Bluetooth Default Settings is highlighted.
4
Press .
The Bluetooth Default Settings menu appears with
the option for Bluetooth Enabled highlighted.
5 repeatedly until On appears.
Press or
6
Press or repeatedly until the option for
Discovery Mode is highlighted.
7 repeatedly until On appears.
Press or
8
Press .
If you set Security to High, you must type in the pass
key from another Bluetooth-enabled device
Consider setting Security to Low to eliminate the need
for a pass key:
1
From the control panel, press
until Setup is highlighted.
2
Press .
3 repeatedly until Change
Press or
Bluetooth Default Settings is highlighted.
4
Press .
The Bluetooth Default Settings menu appears.
5
Press or repeatedly until the option for
Security is highlighted.
6 repeatedly until Low appears.
Press or
7
Press .
For more information, refer to the documentation that
came with the external Bluetooth-enabled device.
158
or repeatedly
or repeatedly