Introduction; Specifications; Controls; Electrical - Intercomp CS3000 User Manual

Introduction

This manual contains specifications, operation instructions, and calibration instructions
for Intercomp's model CS3000 crane scale.

Specifications

Controls

General:
Display:

Electrical

Batteries:
Battery life:
Filtering:
Stand-by
Mode:
Auto-Zero:

Performance

Speed
Accuracy
Calibration
interval

Environmental

Humidity
Temperature
EMI/RFI

Radio

Radio frequency
License
requirements
Range
!
Tare, lb/kg, Zero, Mode, Accum/Total, On/Off
5 1/2 digit, 1 inch liquid crystal display (LCD), with automatic
back lighting.
8 X D-size alkaline
3000 hours (4 months continuous use)
9000 hours in Stand-by mode.
Adjustable averaging up to 30 seconds.
Scale goes into stand-by when shut off via RFX remote,
or after adjustable time without use or motion. When in
'stand-by' mode, scale can be turned on with the RFX
remote.
Satisfies all HB-44 requirements.
4 display updates per second
± 0.1% of reading or ± 1 display graduation, whichever is
greater.
Twelve months recommended
10 to 95% Non-Condensing.
Operating: -28 C to +65 C. / -20 F to +150 F.
Storage: -40 C to +75 C. / -40 F to +170 F.
Meets Mil Spec 461
ISM 2.4GHz, 802.15.4
None. Pre-approved US/FCC, CAN/IC, EUR/CE
200' / 60m indoor, 300' / 90m line of sight
WARNING:
This equipment has been approved for mobile applications
where the equipment should be used at distances greater than 20cm from
the human body (with the exception of hands, wrists, feet, and ankles.
Operation at distances less than 20cm is strictly prohibited.
Page 4 of 35
CS3000, Users
Rev A, January, 2011