Washing (Am); Washing (Am) - Cushman 1600XD4 Owner's Manual

(1) adjusting bolt (a) belt tension
3. loosen the adjusting bolt on the
top of the alternator as well as the
hinge bolt on the bottom of the al-
ternator.
4. leverage the alternator toward the
outside.
5. fix the upper adjusting bolt and
push down the section a of the
belt to measure the tension.
standard
1 in. (25 mm) when pressing
belt tension
(a)
6. if necessary, loosen the adjusting
bolt and make adjustment. then,
measure the tension again.
7. after adjustment, tighten the hinge
bolt firmly. check the adjusting
bolt is tightened as well.
UUVO761A
If getting too close to rotating

parts, such as the belt, dur-
ing the engine is running, your
clothes or part of your body
can be caught.

WAshING (AM)

it is recommended to wash your ve-
hicle with water of moderate pres-
sure and with or without soap. When
washing your vehicle in a car wash,
make sure high-pressure water is not
directly sprayed to the following com-
ponents:
center of belt
WARNING
MaiNteNaNce
IMpoRTANT
Never spray high-pressure wa-

ter to the radiator core, spark
arrester, various warning de-
cals, air cleaner inlet, CVT
cover air inlet and outlet, key
switch, instrument panel, air
breather of gearbox and dif-
ferential case, CV boots and
steering rack boots, alternator,
various wiring connections,
electric sensors and switches.
7
-1
7