Checking And Changing Front Axle Oil (T); Checking And Changing Front Axle Oil (T) - Cushman 1600XD4 Owner's Manual

WARNING
you can get burnt badly by

hot oil. Make sure to work on
it after it is sufficiently cooled
down.
ChECkING AND ChANGING
fRoNT AXlE oIl (T)
1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine and let the engine
cool down sufficiently.
3. raise the hood and support it with
the support rod
(1) filler plug
4. clean around filler plug, then re-
move the filler plug.
5. check that the differential case
surface is not hot. then, check the
oil level and condition with a finger
bent slightly. if you cannot reach
the oil, it means the oil level is low.
add oil as needed.
6. if the color or viscosity of the oil is
not normal or it is at the oil change
interval, change the oil.
(1) Drain plug
UUVO736A 7. to change oil, place a container
with wide opening under the drain
plug. then, remove the drain plug.
8. after draining all the oil, install the
drain plug firmly.
7
MaiNteNaNce
-2
UUVO737A
7