Checking Brake Pedal Free Play (Y); Checking Brake Pedal Free Play (Y); Checking Brake Pad (Z); Checking Brake Pad (Z) - Cushman 1600XD4 Owner's Manual

7
1600xD4
-0
Brake fluid
6. If the brake fluid is severely con-
taminated or insufficient, contact
your Dealer.
ChECkING BRAkE pEDAl
fREE plAy (y)
the master cylinder rod of the vehi-
Dot 3
cle is adjusted so that the brake ped-
al free play is 0.59 ~ 0.79 in. (15 ~ 20
mm) at factory. if the free play of the
brake pedal should be adjusted, per-
form the following steps.
1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine, open the hood
and support the hood.
(1) Master cylinder rod
3. Measure the free play of the brake
pedal. according to the measure-
ment, adjust the length of the mas-
ter cylinder rod(1).

ChECkING BRAkE pAD (z)

1. park the vehicle on level ground
and apply the parking brake firmly.
(1) Wheel Nut
2. unscrew the nuts of the wheel to
be checked only 1 turn.
3. lift the vehicle with a hydraulic
jack and then support the vehicle
UUVO745A
with the safety stand. then, lower
the hydraulic jack so that the vehi-
cle chassis sits on the stand.
4. unscrew the wheel nuts complete-
ly to remove the wheel.
UUVO746A