Turning; Turning; Driving On Slope; Driving On Slope - Cushman 1600XD4 Owner's Manual

TURNING

before entering a curved road, slow
down your speed. turning at a high
speed can lead the vehicle off the
course, resulting in a severe acci-
dent.
be careful not to lose balance during
turning. the driver and all occupants
should wear the seat belts. if the dif-
ferential lock system is used during
turning on a normal road with suffi-
cient friction, the durability of the in-
ternal gears related to the differential
system can be damaged. also, there
is a high chance that the vehicle can
over turn due to poor steerability.
if cargo is loaded onto the cargo bed
too high, the center of gravity of the
vehicle gets high and the centrifugal
force increases when turning. there-
fore, drive slower when turning.
WARNING
To. prevent. an. accident. due. to.
loss.of.steering.control:
If. turning. at. a. high. speed,. the.

vehicle.can.turn.over.
Never. use. the. differential. lock.

s y s t e m. w h e n. t u r n i n g. a t. a.
high. speed. and. even. at. a. low.
speed..A. serious. accident. can.
occur.
operation
DRIVING.ON.SLOPE
UPHILL.AND.DOWNHILL
15 Maximum
1. move the shift lever into the "l"
position before driving uphill. also,
select the 4wD as necessary de-
pending on road surface condi-
tions.
2. avoid driving on a slope of 15° or
more. Drive the vehicle at a low
speed so that the engine is not ap-
plied with excessive load.
5
-15
UUVO511A
5