Checking Injection Nozzle And Fuel Injection Pump (N); Checking Injection Nozzle And Fuel Injection Pump (N); Cleaning Radiator Core (O); Cleaning Radiator Core (O) - Cushman 1600XD4 Owner's Manual

ChECkING INJECTIoN NozzlE
AND fUEl INJECTIoN pUMp (N)
the injection nozzle and injection
pump can be inspected only by a
qualified service personnel. for de-
tailed information, contact your Deal-
er.
IMpoRTANT
Modifying sealed parts in the

fuel system, such as the flow
limit bolt and engine rpm lim-
it bolt, is strictly prohibited by
the emission regulations. If
such regulations are not fol-
lowed, it will not be covered by
warrant and will void any war-
ranty.

ClEANING RADIAToR CoRE (o)

1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine, open the hood
and support it.
(1) brush guard (high) (3) brush guard (low)
(2) brush guard (Middle)
3. remove the three grilles from the
brush guard.
(1) radiator
4. spray compressed air or water to
UUVO726A
the radiator from its inside toward
outside to remove any foreign ma-
terials stuck in the radiator core.
Do not remove the radiator cap

while the engine is hot. you
can get burnt by hot steam.
Make sure to remove it after
the engine and radiator have
cooled down enough.
7
MaiNteNaNce
-1
UUVO727A
7
WARNING