Checking Differential Lock Cable (Ai); Checking Shift And 4Wd Cables (Aj); Checking Shift And 4Wd Cables (Aj); Checking Differential - Cushman 1600XD4 Owner's Manual

ChECkING DIffERENTIAl

loCk CABlE (AI)

(1) Differential lock cable (2) Nut
1. park the vehicle on level ground
and apply the parking brake firmly.
2. stop the engine, raise the cargo
bed and support it with the support
rod. (in case the hydraulic dump-
ing kit is installed, raise the car go
bed before stopping the engine.)
you can get burnt by touching

hot parts, such as the muffler.
Make sure the vehicle is not
hot before starting servicing.
3. unscrew the nut and adjust the
cable length.
4. to check the differential lock oper-
ation, lift the rear axle with a jack
UUVO759A
so that the rear wheels are off the
ground.
5. set the differential lock lever to the
"lock" position and rotate one of
the wheels manually. it is normal
that the other wheel rotates in the
same direction.
6. set the differential lock lever to the
"unlock" position and rotate one of
the wheels manually. it is normal
that the other wheel rotates in the
opposite direction.
ChECkING shIfT AND 4WD
CABlEs (AJ)
WARNING
(1) shift cable
(3) 4WD cable
1. park the vehicle on level ground
2. stop the engine, raise the cargo
MaiNteNaNce
(2) Nut 1
(4) Nut 2
and apply the parking brake firmly.
bed and support it.
WARNING
you can get burnt by touching

hot parts, such as the muffler.
Make sure the vehicle is not
hot before starting servicing.
7
-
UUVO760A
7