Checking And Changing Rear Axle Oil (U); Checking And Changing Rear Axle Oil (U) - Cushman 1600XD4 Owner's Manual

7
1600xD4
-2
(1) funnel
9. W h e n a d d i n g n e w o i l , a d d i t
through a long hose into the fill-
er plug location. fill till oil starts to
spill out of filler plug hole.
oil Capacity 0.16 u.s gal. (0.6 l)
10. check the oil level by performing
the step 5 in the previous page. if
the oil level is normal, install the
filler plug.
11. Wipe the differential case and its
surrounding with a rag thorough-
ly.
12. test drive the vehicle for 5 to 10
minutes to check for leakage.
you can get burnt badly by

hot oil. Make sure to work on
it after it is sufficiently cooled
UUVO762A
down.
ChECkING AND ChANGING
REAR AXlE oIl (U)
1. park the vehicle on level ground
2. stop the engine and let the engine
WARNING
(1) filler plug
3. clean around filler plug, then re-
4. check that the differential case
and apply the parking brake firmly.
cool down sufficiently.
move the filler plug.
surface is not hot. then, check the
oil level and condition with a finger
bent slightly. if you cannot reach
the oil, it means the oil level is low.
add some oil.
UUVO738A