Siemens Gigaset DX800A all in one Setup & User Manual page 40

¤
Define a connection as the send connection for each device. To do this, select
the option (radio button) following the connection in the for outgoing calls
column. The previous assignment will automatically be deactivated.
If you select the option Select line for each outgoing call instead, you can select
which MSN is used to establish a connection every time you make a call.
Please note
The Gigaset.net number is fixed as the send connection for the base and each
registered handset. Numbers that end in #9 are automatically dialled via
Gigaset.net.
¤
For each device, select the connections that are to be assigned to the handset as
receive connections. To do so, click the option following the connection in the
for incoming calls column. Every handset can be assigned several or no connec-
‰
tions ( = assigned).
¤
Select Set to save your settings.
Please note
u
If the connection assigned to a device as a send connection is deleted, the
analogue fixed line network connection or the first ISDN MSN in the config-
uration is automatically assigned to the device as a send connection.
If the base is connected to the ISDN and no MSN has been configured, the
first VoIP connection of the configuration is used as the send connection.
u
If a connection is not assigned to a device as a receive connection, calls to
this phone number are signalled neither on the base nor any handset.
37