Activating/Deactivating The Automatic Version Check - Siemens Gigaset DX800A all in one Setup & User Manual

Activating/deactivating the automatic version check

When the version check is activated, the phone checks on a daily basis whether the
Gigaset configuration server has a new version of the phone firmware or the pro-
vider profile (general provider data).
If a new version is available, a notification is sent to the base and the corresponding
message flashes. You can then perform an automatic update of the firmware or of
the provider data. Please refer to the user guide for the base.
¤
Open the Settings
¤
Select Yes next to Automatic check for software/profile updates to activate the
automatic version check.
Select No if you do not want a version check to be carried out.
¤
Select Set to save the changes.
Please note
If the telephone is not connected to the Internet at the time when the check for
new versions is to be carried out (e.g., because the router is deactivated), the
check is carried out as soon as the phone is reconnected to the Internet.
¢ ¢
Management Firmware Update Web page.
65