Siemens Gigaset DX800A all in one Setup & User Manual page 67

Hide thumbs Also See for Gigaset DX800A all in one:

Table of Contents

Please note

In exceptional circumstances you may receive, for example, a firmware file from

Service that you can upload from the local PC to your telephone (e.g., because

the firmware update via the Internet did not work). Check the prerequisites for

your PC.

First download the firmware file to your PC, and in the User defined

firmware file field, enter the IP address of the PC in your local network and

the full path and name of the firmware file on the PC (max. 74 characters).

Now click the Set button, and then the Update Firmware button to start the

update.

The information in the User defined firmware file field is only used during this

(following) firmware update.

If an error arises during a firmware update from a local PC, the new version of

the firmware is automatically downloaded from the Internet.

Resetting the firmware - reload the previously downloaded

firmware version in the phone

You can reload the firmware version that was loaded before the last update on the

phone. The new firmware is overwritten.

Select the Downgrade Firmware button. The text above this button shows the

version of the firmware that you want to reload

In the following dialog box, click the Yes button to confirm the prompt.

The firmware loaded before the last update is reloaded to the phone. Your connec-

tion to the Web configurator is terminated, and the base is rebooted.

This process can take up to 3 minutes.

Table of Contents

Show Quick Links

Table of Contents