Siemens Gigaset DX800A all in one Setup & User Manual page 35

Settings for Bandwidth area
The settings in this area affect all VoIP connections.
Allow 1 VoIP call only
You can usually make up to four VoIP calls at the same time on your phone. If,
however, your DSL connection has a narrow bandwidth, there may be problems
if multiple VoIP calls are made at the same time. The data is no longer transferred
properly (long voice delay, data losses etc.).
¤
Select Yes after Allow 1 VoIP call only to prevent any further parallel VoIP
phone connections being established.
¤
If you wish to permit multiple parallel VoIP connections, select No.
If only one VoIP connection is permitted, the following VoIP network services
will no longer be available:
u
u
u
Voice Quality
Default settings for the codecs used are stored in your phone: one setting opti-
mised for low bandwidths and one for high bandwidths.
¤
Activate one of the options Optimized for low bandwidth / Optimized for
high bandwidth if you wish to accept a default setting for all VoIP connec-
tions. The settings are shown in the Settings for Connections area and can-
not be changed.
¤
Activate the Own Codec preference option if you wish to select and set con-
nection-specific voice codecs yourself (see
area").
Settings for Connections area
In this area you can make specific settings for each of your VoIP connections.
You can make the following settings for each VoIP connection configured on your
phone:
Volume for VoIP Calls
Depending on the VoIP provider, it is possible that the received voice/earpiece
volume is too low or too high, so that adjusting the volume via the handset is not
adequate.
Specify whether the received volume range is too high or too low. The following
options are available:
Low
Voice/earpiece volume is too high. Activate this option to reduce the volume by
6 dB.
Normal
The voice/earpiece volume does not need to be raised/lowered.
32
Please note
Call waiting
Call waiting is not displayed during a call via VoIP.
External consultation call from a VoIP call
Call swapping and initiating a conference call via VoIP
"Settings for Connections